Led Strip Lights, 5V USB LED Lighting COB Short LED Strip Light White Flexible Not Dimmable led Light for Display Cabinet, Living Room,DIY Home COB Lighting Decor tv Lights (3.28FT 6500K)

These things are actually bright, and are a pleasing solid line of light, not the usual "dotted line" look you get with LED tape. They seem to stick well, although only time will tell. The only issue I had was the backing paper for the adhesive tears super-easily, so it took me forever to expose the adhesive.

Nice roll with a USB power connector. Will work with any adapter. Can be trimmed as needed. Sticky back if you need to affix them to something. Inline power switch. Would purchase again for future projects. Comes in a roll.

Fit my 3d printed lightbox perfectly... However, I was lucky.

This light strip works very well as a backround illuminator behind a large picture. We attached it to the frame pointing to the wall paired with a remote control plug. We had to use a USB extension cord to get power to it, something we knew beforehand. We like the illumination effect and will buy the strip again for other projects.

Plugged this into my Bambu Lab P1S. It’s a perfect power source. Plugging these into a usb into the wall isn’t why you want to do. These require barely any power.. so plugging them into a normal house outlet will make these not last long. They aren’t meant for that kind of power. Anyways the P1S has a usb port on the top inside towards the front of the printer. Take the top glass off, look inside towards the front and you’ll see it. I basically plugged the led light into that usb, wrapped up the cord and taped it next to the usb box. The led light gets routed on the small lip directly under that usb box on the printer. If the cord sticks out at all, the printer head will hit the cord and cause the tool head to fall off. The way you need to route the cord and and led is if you’re looking at the front of the printer, the cord should tuck in to the right of the box, led strip goes directly down and then directly to the left. Hope this helps any others with these printers.

Working great! As described and fast shipping.

Tape will NOT stick to plastic. Cleaned with alcohol like I normally would. Stick them on and they fall off after a few hours. I have had to glue these on. Light is good and bright, doesn’t seem cheap. Just the issues with the tape. Wish the usb leads were a little longer but they work.

I bought this from Amazon for my bathroom mirror. I have a LED mirror and I would NEVER recommend using one unless you have a lot of light in the bathroom, of which I don’t. I put it around that mirror. It made it so much brighter than the mirror lights do. These lights have a sticky side to them that helps keep them in place. They can be cut to size, read the directions first please. You can dim them, make them brighter. They can be used any where you need them to be as long as you have an outlet close by. Also these do not have an adapter to use in an outlet, so you need one to use them. That’s why I only gave 4 stars.