Thermalright CPU Contact Frame for LGA 1700 Retrofit Kit, 17XX-BCF Bracket Intel 12th/13th/14th Generation Anti-Bending Buckle Black

Aynı markanın dijital hava soğutmasını kullanıyorum, i5 14600kf yi yaklaşık 3-4 derecelik serinliğe kavuşturdu, ben değdiğini düşünüyorum, kaliteli başarılı.

I have a i7 13700kf and have noticed since i got it that the temps while idle and gaming are extremely high. ive tried everything with fan curves and the like. While all that has made some change in lowering the temps i still felt more could be done. Thats how i came across this product. It is extremely easy to install and even comes with instructions just in case youre a little unsure. Once i booted up into a game, ive noticed my cpu temps have often been a few degrees lower than my GPU! My GPU only gets 65-70 degrees on 1440p gaming so the fact my CPU has shown lower temps is mind blowing! GET ONE TODAY!

I'll start off with stating I didn't try to see how hot it would get without installing the frame. After watching a few of the videos about the potential issue with the 12900k I didn't want to take any chances. I originally was going to go with a more expensive brand, but after I watched a Gamers Nexus video about this frame I decided to give it a shot. It cost well below the more expensive one and seemed like it would do the trick. The processor I replaced was a 9900k I'd had for a few years. I had bought a NZXT Kraken X73 I'd used with the 9900k and had to wait on the mounting bracket for the LGA 1700. Since I was waiting on the bracket I decided to order the frame. Bottom line is if you follow the Gamers Nexus video you will have no problem installing this frame properly and shouldn't have any issues with the processor getting too hot. I added tick marks to the screws and turned them in 90 degree increments until it was tightened. So my current build is a i9-12900k with a MSI Z690 MPG Edge Wifi DDR4 with a NZXT Kraken X73 in a Fractal Design Meshify 2 case. I have the radiator at the front and three CM120 exhaust fans at the top and a 140mm rear exhaust. The current stock idle temps are between 25C-30C. This was run at stock settings and as you can see in the very limited run of Cinebench, and the temps it was getting, the 12900k is capable of working at decent temps. I did play some World of Warcraft and didn't notice any temps to be concerned with. Again, I've not tested it without the frame, and seeing the issues others have had, this seemed like a cheap preventive fix. I highly recommend this option if you are concerned with the potential heat issues with this CPU. My only complaint with this product is that it looks very good and is completely hidden under your cooler. I went with the black one since it wouldn't be seen.

Nessun problema di installazione, nemmeno con IHS custom in rame di marca Rockit Cool. E' bastato inserire il processore e montare il telaio di contatto avvitando le viti diagonalmente, fino alla fine. Processore e scheda madri perfettamente funzionanti dopo l'installazione. Temperature di 2-3 gradi inferiori. Non sarà un risultato eccezionale come molti si aspetterebbero ma ha due vantaggi: -Di sicuro il processore non andrà da nessuna parte, e non avrà problemi di contatto e deformazione per anni - Anche quei pochi gradi in meno aiutano

Un super accessoire à installer sur son CPU. J'étais un peu septique de la plus-value de ce type d'appareil mais après avoir regardé plusieurs vidéos à ce sujet, je me suis laissé tenté et je ne suis pas déçu ! J'ai perdu entre 5 à 8° sur mes températures et, même si ce n'est pas très important, ça apporte un look vachement sympa au CPU. Je recommande ce produit.