[Upgraded Version Cup Holder Phone Holder for Car, Universal 360° Adjustable Long Neck Car Phone Mount Golf Cart Truck Jeep, Compatible with iPhone Samsung Google & All 4.0-7.0 '' Phones

I bought 2 of these for my vehicles. They came in the time promised and they look great, better yet they fit and work great in both cars. I canceled my order with W.T. for their phone holders. They were over priced and did not look as good. These don't shake and are easy to adjust. I have a relative that has the W.T. holder and it loose fitting and the arms don't adjust well. Great job LISEN, a product that works and is well priced.

In many of the other reviews, a lot of misleading things are said. I'll provide the best information to help guide your purchase. For my uses in my vehicles and the ways I use or reference the phone in the car, this works perfectly. Depending on your car and preferences, your mileage may differ. As shown in the pictures of my cars, it does not interfere with any levers, buttons, gear handles or the floor lizard. 1. To check the fit and height, Velcro the middle of your phone at the 11 inch mark of a ruler and place it in the cup holder. If your phone is large, put the 11 inch mark lower on the phone. Pictured here is an iPhone 13 mini in a 2020 Toyota Camry using a half-yard stick. Because the phone will sit to the front of the mount which runs from the center of the cup holder, the phone itself will be at the forward edge of the cup holder. (It is pictured here at the rear because that was the easiest place to balance it for the shot.) As you can see in the product pictures, the phone goes onto a ball joint that is tilted forward. From the bottom of the holder to ball is 11 inches. Or you can mount it lower by shortening the arms. 2. In my Camry, the cup holders have a channel between them. This is important because the mount tightens in the cup holder by three strong pads expanding outward. Before installation, twist the top sections so the ball joint & holder faces the way you want while all three pads will fully go against walls of the cup holder and not align with the channel. Once in, it is solid after the other screws on upper joint and center swing arm are tightened. 3. In the Toyota RAV4 luxury edition, the cup holder situation is a bit different. One holder (not shown) can't be used because it has a soft insert for cups that can be taken out to allow not-round items. The other cup holder is partially under the console, requiring the mounting to have the upper arm tilt slightly forward. Or, I guess, you can just mount it lower. 4. I find it weird that some reviews complain that outer shells are all plastic with metal mechanisms inside. Yes, it is plastic, the same as your dashboard, steering wheel and the cover on the glove box. 5. The single button release is smooth to unlock the phone that still rests on the bottom mount till you lift it out. 6. I do not look at phone while car is in motion, but do want it handy at stop lights or when the road turns into a de facto parking lot generating a need to consult an app for an escape route. At the same time, I found that any mounts on windshield or the top of the dashboard add another safety-reducing blind spot. 7. Some other reviewers seem to have reduced the life span of mechanisms by moving the holder back and forth between cars. At this price, you can get one for each car, set it up and leave it. With so many reviews already posted, I don't know if anyone will read this. But if everyone does, it can save them grief by guiding them to an informed decision as to whether this product is right for them. I have bought several other products by this brand in the past, always satisfied in quality and performing as promised, with the company responding properly to help with difficulties.

Works perfectly in my 2017 Malibu after the infotainment system had a catastrophic failure of the touchscreen and is no longer useable for GPS, Apple Autoplay, etc. I got the standard black model and it does wobble a bit, but it is not distracting and does not obscure view of the screen while driving. Simple to use, and once you have everything where you want it, it stays. Fits my Apple iPhone XR, in a medium thick case, comfortably without blocking or pressing any buttons. I would love if there was an option somewhere out there that existed to fit wallet phone cases, but alas, I will have to settle for swapping case before and after driving. All in all, functions as described, sturdy, and will keep my GPS in safe view while driving.

Fits in cup holder and does what it is intended to do. Stable and sturdy. Gave it a 4 star cause it is rather big and bulky and feels like it takes up a lot of mid console room. Doesn't look stream line with the car, but holds phone great and like the position, but just big and very noticable.

I have been using it for almost a year now and so far so good. If you don't mind using one of your cupholder to use as the base of your phone holder, then, this phone holder is for you. I don't like the idea of phone holders on top of the dashboard or on the windshield which potentially block the view while driving and parts of the suction cup are left over the dashboards and windshields due to heat which makes cleaning your car interior a nightmare. I also don't like the idea of phone holder on my car AC vents which just a flimsy plastic that could break eventually because of the weight of the phone. This phone holder answers to all those concerns, albeit sacrificing one of your cup holder as the base of your holder. Everything else works from the base, to the arm, to the clamp that holds the phone.

This item is a quality item, but not user friendly. I haven’t had any issues with the construction or breakage. But it takes minutes to get the right height, to fit it in the cup, and to get my phone inserted properly!

Works great. Nice adjustable feature, both to fit multiple sizes of cup holders, and to raise and lower the height. Also the cradle can be adjusted left/right, up/down to angle the device it holds for easier viewing. If I only had one extra feature, it would be to raise the height of the cradle even a little bit more for us tall guys. Otherwise, it's a nice product.

This is a great phone holder! Its easy to use and extremely sturdy and stable. I love it because you're not relying on how good a suction cupnis or ruining your car with adhesive. It fits right in your cup holder perfectly. Since cup holders are generally within arms reach, its in the perfect location. I've been using it everyday for a month and it holds my phone snuggly and securely with and without my phone case on!

Excellent product. It fits perfectly in my Tesla Model Y 2025 Juniper. The build quality is solid, and the holder is very stable even on rough roads. It’s easy to place and remove the phone, and the small opening at the bottom makes charging simple. The angle can be adjusted easily, and the base locks firmly in the cup holder by tightening the knob. It’s convenient, well designed, and works exactly as expected.

This product has the adjustments needed to fit any cup holder and it can adjust up and down and angled. It is sturdy and can accommodate various phone sizes.

The LISEN Cup Holder Phone Mount for Car is a game-changer for hands-free driving! This mount fits securely into the cup holder and holds my phone firmly in place, allowing for easy access to GPS or music without distracting me while driving. The adjustable base ensures it fits snugly in different cup holders, and the flexible arm allows for multiple viewing angles. The build quality is solid, and the phone holder is very stable, even on bumpy roads. I love that it’s quick to install and remove, making it perfect for switching between vehicles. Overall, it’s a must-have accessory for anyone who uses their phone in the car frequently. Highly recommend!

Está muy bueno y es cómodo, porque si te estorba lo puedes quitar fácil

Works well...holds my phone nicely(S24 ultra with a case) Just make sure your cup holders arent too far back otherwise it makes it hard to use while in the car as u need to look down.