Aquascape Pond Filter and Waterfall Spillway, Efficient Mechanical and Biological Filtration, Compact | 77020,Black

Great filter, easy to clean and easy to install

Exactly what I wanted. Perfect for a small pond. I have a 2500 GPH pump running this and it works great.

The media could not be loaded. Very easy to install. Not water hose and bio ball included. Need to buy by yourself. I order 1 inch soft plastic hose as you see in the video. Plastic bio ball for pond. Put the UV light inside the filter area. Use few hours a day only. I temporarily use it indoor. Originally, I put it in my outdoor pond. But my outdoor pond not yet settled. So use it as indoor waterfall still good too. The pump I just use a very simple submarine fountain pump.

Bought this to replace a waterfall that was leaking. Was a little worried about this one just didn't seem to have a big enough spillway. But puts out decent water with a 2600 gpm pump. Did have an issue with a leak at the fitting located at the bottom of the tank but after tightening it and making sure the o-ring was clean hasn't leaked since.

excellent product no issues

The media could not be loaded. This pond filter and waterfall is a great buy. Properly positioned it looks awesome…make sure you have it completely level so the water falls evenly across the spillway.Here’s a couple of tips. The plastic adapter that it comes with which screws into the bulkhead is for attaching 3 sizes of pond type tubing but I wanted to attach a garden hose. To do that you need a 1”NPT to 3/4”GHT adapter.Here is the Amazon link to the adapter. PVC Garden Hose Adapter (1" NPT x...This replaces the black hose adapter pipe, but you will still be using the screw on ‘bolt’ and washer. The hole in the bulkhead is 1”.I just saved you at least an hour of searching!Two things you will have to do.#1: on the 1 inch threaded side you must cut off the quarter inch of flat plastic at the end of the threads. Otherwise the black screw on bolt will not thread all the way down tight to the filter body, which it must.#2: buy a small tube of silicone sealant as the connection at the bulkhead is not very good even when tightened down. Tighten down firmly but carefully (don’t forget the washer) as they are just plastic parts and you don’t want to break anything. Then thoroughly coat the garden hose side of the adapter (outside the filter) where it presses against the washer and the filter unit. I mean slather it on and let dry thoroughly. That way when you start pumping water through, there will be no leaks.Enjoy!

Although I had to adapt the connection for my pump, the product works quite well. The size allows lots of filter material and the flow through the lip is just right. I give it a 5.

The media could not be loaded. Installed this with a pond liner and small pump to create a 250 gallon corner pond for a small serenity garden. BE ADVISED: This is ONLY the basin. There is no hose or equipment. Used a 1” hose and I’m very happy with it. Basin is much larger than i originally thought but i love it. Heavy duty material. Super easy to install. Highly recommend.