








Specification: Basic function: Range: DCV: 600mV/6V/60V/600V (0. 5%+3) ACV: 600mV/6V/60V/600V (0. 8%+5) DCA: 0-600A (2. 0%+30) ACA: 0-600A (2. 0%+30) Resistance: 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ (0. 8%+3) Capacitance: 60nF/600nF/6uF/60uF/600uF/6000uF (3. 5%+20) Frequency: 10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/20MHz (0. 1%+3) Temperature: (-40~1000 )℃/(0~1832 ) ℉ (1. 0%+5) Special function: Diode test: √ Continuity test: Less than 50Ω 10Ω Low battery indicator: Approx. less than 2. 6 V Data hold: √ NCV: √ Auto power off: About 15 minutes Terms test: √ Function protection: √ Clamp light: √ Backlight display: √ Input impedance: 10MΩ Sampling rate: 3 times/s AC frequency response: Current 50-60Hz/ voltage 50-400Hz Operation method: Auto or manual range Max display: 6000 Clamp opens: 28mm Battery: 3V (2*AAA battery) General Characteristic: Meter color: Orange and Black Meter weight: About 200g (including battery) Meter size: 210×110×45mm Standard accessory: Test leads, battery, manual, temperature probe, alligator clip Notes: 1. All clamp meters can measure current through a single wire, if you put two wires into the clamp jaw, the reading will be zero, only from one wire, you will get exact digits. Package Content: 1 x Clamp Meter 1 x K-Type Thermocouple 1 x Test Leads (Pair) 1 x Alligator Clip(1 pair) 2 x 1. 5V AAA Batteries(Inside the Clamp meter) 1 x User Manual 1 x Cloth Pouch








| Brand | Proster |
| Power Source | Battery Powered |
| Style | Black 6000Counts |
| Colour | BLACK |
| Item Weight | 0.37 Kilograms |
| Item dimensions L x W x H | 18.5 x 6.5 x 3.2 Centimeters |
| Min. Operating Voltage | 90 Volts |
| Specification Met | Ul 61010-1, Iec 61010-2-030, Overload Protection |
| Upper Temperature Rating | 1000 Degrees Celsius |
| Measurement Type | Clamp Meter |
| UPC | 757347418813 |
| Manufacturer | Proster Trading Limited |
| Country of Origin | China |
| Model number | PDM-6000NCV |
| Item Weight | 370 g |
| Product Dimensions | 18.5 x 6.5 x 3.2 cm; 370 g |
| Batteries | 2 AAA batteries required. (included) |
| Item model number | PDM-6000NCV |
| Item Height | 32 Millimeters |
| Item Width | 6.5 Centimeters |
| Are batteries included? | Yes |
R**A
Parfait
Très bon appareil, bon rapport qualité prix. Livraison rapide.
K**F
Better than expected.
I bought this to check the dc amps on my stick welder as I suspected the welder display was not accurate (it wasn’t). However this clamp meter has now replaced my normal multi meter in mobile tool kit. This is because it does everything my old meter does as well as the very useful ac voltage and dc current via the clamp ring. This is very useful when tracing no one start electrical faults on vehicles, clamp kit round the power or earth cables and drill down to where your problem is, without having to interrupt the circuit. I read a previous review where someone said you cannot zero the dc clamp reading, you can, you just have to press the “range” button, not the “rel” button like it says in the manual (there isn’t a “rel” button). The only thing you can’t really do with this meter is trace parasitic drawers as the resolution at the miliamp scale is not good enough. You need a low amp clamp meter for that. But for everything else, it’s great.
H**Y
Gutes Gerät – schnelle Lieferung
Ich habe ein Gerät gesucht, mit dem man Gleichstrom messen kann, z. B. am Auto, Modellbau, Solarpanel etc. Leider gibt es einige Amperezangen zum gleichen Preis, die keinen Gleich-, sondern nur Wechselstrom messen können, damit für mich unbrauchbar. Dieses Teil hier macht seinen Job gut, auch Spannungsmessung scheint sehr genau zu sein. Bei Amazon Freitagabend bestellt, Samstag geliefert. Perfekt!
益**雄
DC 電流が測れること
車の DC 電流が測りたかったが日本製は 3万 4万するので 買えなかった それが4000円5000円こうかなちょっとで買えるので 最高 その他いろいろなテストするようなものがついているので またまた良かったです 大満足AC 電流計は持っているが 直流が手頃値段のものはなかった
M**O
inaccurate reading
voltage is reading nearly 1v over what it actually is on a 12v battery. its not reliable.
Trustpilot
1 month ago
4 days ago