BlendinReplacement Extractor Blade Part with Gasket, Compatible with Nutribullet 600W, 900W, NB-101B, NB-101S, NB-201, NBR-0601, NBR-1201, NB9-1301, 900 Pro Series Blenders

This was my second replacement blade. The last one was just the blades and I had to remove the old & install the new. They worked pretty good. This new Blendin base is better than the original. There are several base replacement options on Amazon but this one is great. It is sturdier, has a better bearing, runs quite and the base fits the cups perfect, and is one of the less expensive.

Should have listened to the poor reviews. I received this and immediately knew it wasn't going to perform well. The shaft connecting the blade to the rubber "Teeth" at the bottom is about half an inch too long making the blade stick way up when in the blending position. you can pull and push the blade up and down, the OEM one you cannot move the blade up and down, there is no play. There are no seals around the base of the blade shaft so fluid can leak into the bearings. As other's have pointed out, the blades are dull. The outer rubber gasket does not fit correctly. Sending this back. Do yourself a favor and get the OEM one from their site.

My friend broke this part on her Nutri Bullet and I was afraid that I would have to buy a new one for her (she does not have money for that.) Instead, i was able to just get the part and it works.

It has been working well. It didn't get 5 stars because the gasket is difficult to remove. The original had a small low spot on the inner wall that allowed you to pull up the gasket up. This one does not.

Purchased to replace my original one due to the bearings wearing out. Threading wasn’t correct once you manage to screw it on the cup nice and tight to avoid it leaking. It was near impossible to unscrew, have an oil filter wrench available to unscrew it. I ended up buying and original no issues loosens and tightens with ease.

Moved a while back, and I lost the original blade. This one works just fine, similar to the original I had. Holds up well with blending, and its easy to clean. No problems :)

I have been buying these from this seller for several years. The last 3 times I purchased these they lasted only a few months before leaking grease. I had ordered one for my parents that also only lasted a couple months. I will find somewhere else to buy them.

It was good, except it came with no gasket! The gasket from the old nutri bullet base does not fit this one, So I tore it apart and used the blades on the old base. Works great now but kind of a nuisance.

siehe oben. Der Preis war niedriger als von mir befürchtet

Found it much stiffer than my previous blade but seems to be functioning A-1

Only used a couple of times so far but seems to be working well so far.

The bearings seem tighter than the original so rpm speed is sonewhat reduced but overall a good value for the price.

This a good replacement for a worn out OEM part. We have been using it for several weeks now and it still feels like new.