Car Jack 2 Ton Capacity for Pickup Truck 7.76”-16”

Worked as replacement for Chevy Colorado

I used this to lift a retaining wall so that I could will the bottom with gravel. Its a great little poserful jack.

As advertised There are some sharp edges so be aware Lifts my 5800lb truck

Buen Equipo, tiene Fuerza para levantar un vehículo pesado y extiende bastante más de 24 "

Seems easy to use. Fast operation. Pretty solid.

Had to use it twice one time to pick up the front of my truck second time to change a blown out tire worked as you would expect it to

Excelente calidad, entró sin ningún problema en el espacio dedicado al gato de una Toyota Fortuner 2009.

In addition to the excellent write up from the earlier reviewer, I would like to add a few points. The main strength of this jack - ability to raise tall vehicles in the field - is also its biggest shortcoming. It simply wouldn’t fit under a normal sedan (5.5” average ground clearance) or even an SUV if its tire happens to be completely flat. This is not a unique disadvantage, all bottle jacks share the same. Of course, this is where a regular scissor jack shines because the screw runs parallel to the ground and it can start lifting from about 5”. The other point is that a complete revolution of the bevel gear (shown in the cutout) results in about half revolution of the main gear driving the screw- which makes the jack real slow, i.e. you have to crank a lot to effect a vertical movement. The telescopic tubes fit together less than plumb and the higher they extend, the more play there is between the top and the base - something to keep in mind if the vehicle is not perfectly level (and why adding a base is not a bad idea). Lastly, the black cap on top is not made of rubber, but of some kind of plastic (or possibly rubber that is so stiff that it feels like plastic). It swivels freely, adding another unnecessary freedom for the jack to wiggle free (the tubes extend without rotating). On the plus side, the steel is properly thick and the whole thing feels heavy and solid. As the other reviewer noted, you are unlikely to lift anything more than a ton with it anyway, so its 4000 lb rating is irrelevant for practical purposes. Some alternatives: 1) This jack appears to be a knock-off of those jacks that Toyota bundled with 4Runners, possibly other OEMs. I didn't have a chance to check them out for performance and quality, but they seem to be available on that certain online resell site and might be a decent alternative for about the same money. 2) If you are serious about your jacking, check out this little nugget and find the YouTube video about it: https://www.amazon.com/dp/B0D59DVD9N or the same without the bundle: https://www.amazon.com/dp/B0D82RCCTS Of course, this one is not so little, it weighs 24 lb, but will raise anything, high or low, and will likely outlast your vehicle, and the next one.

Cumple su función, sería ideal que tuviera resortes pin en las uniones del tubo en lugar de tornillos para agilizar el armado.

Buena compra

El gato bien pero las varillas son muy latosas, hay que estar apretando los tornillos para que estén unidas las varillas Sería práctico si tuviera pernos de presión