Dyson360 Vis Nav Robot Vacuum

It is with heavy heart that I convey how terrible this product is. I've had this Dyson robot vacuum for around 6 months. it is set up to clean one large almost entirely empty room with extremely low industrial carpet. the HW itself seems pretty great with amazing suction that cleans noticeably better than my previous Neato vacuum. However, there are persistent SW issues that make it incredible frustrating to use. I kept hoping a SW update would fix the issues, but i have now given up on that hope. Issues I routinely encounter include: dropping off the WiFi network for no reason (i have other Dyson products like air cleaners that *never* fall off the network) and then being very tricky to get back on the network. his is probably the most annoying given it takes 5-10 minutes to get it back onto the network (which I'll complain more about below). The second most annoying issue is getting "stuck" which is ludicrous given how simple and empty the room is... and to be clear "stuck" seems to mean it bumped into the wall or a simple object like a pole (see photos) whereas other times the robot will just stop in the middle of the totally empty room and declare it is "stuck". There are a few other similar and seemingly related failure modes... like the robot will not indicate it is "stuck" but will just stop in the middle of the room and let the battery drain. Even when it is working well, the app UI (i am on iOS) for managing the WiFi is terrible. If you are (or were previously) connected to a network and go to manage WiFi you cannot see what network you are/were connected to... you can only add a new WiFi connection which will overwrite whatever was previously there. If my robot has fallen off the network and I go to do that it then will allow me to reconnect to the same network and tell me it was successfully connected but frequently it is not actually connected (i.e., I still cannot communicate with the robot via WiFi... just over BT for settings management) so it takes a few tries repeating that for the robot to successfully connect. It seems to work best if I switch WiFi networks instead of trying to reconnect to the one it already dropped off. In any case, you get the idea. Just a tragically and unnecessarily bad product from an otherwise great product company.

I’ve had this since July 25th, 2024 and love it! It works just as well as my 6 other various Dyson products. I would say it’s just as good as my Dyson V12 stick vacuum and the bin holds a ton of dust and other stuff it finds. I live in a 3 bedroom townhouse and can get this to clean almost the whole house in one charge, minus the basement since it’s unfinished and not appropriate for that part of the house. It does get stuck from time to time, not go in a well thought out direction sometimes and seems lost on a rare occasion. I figure that if those are the only down sides then I am happy to spend the extra money on it since I can get one for way cheaper. This is expensive as far as a robot vacuums go but I love anything made by Dyson. Also I named her Rosie after the robot maid on the Jetsons 😋😁

Purchased in Nov 24. I rarely get one full cleaning cycle in a single room, let alone the whole house without it shutting off, getting lost, going where I have set restrictions, not being able to get itself from between 4 chair legs, or thinking it dropped when going over a floor register(all the time). A simple software setting in the restrictions to eliminate drop sensors when not needed would be a huge improvement, now you only have the option to decrease sensitivity.The only plus is the cleaning power but what good is that when it cannot navigate. Totally at a loss. All I get done doing is carrying it back to the dock. Restrictions suck, might as well restrict a whole room.

12/25/2024 - We finally decided to return the vacuum after it crashed 2 times trying to clean 1 room. When it works, it does a great job, but the software is just too buggy. If Dyson comes out with a new model and app, we would give it a try, but this one is more hassle than helper.12/21/2024 - Update: We've decided to keep this vacuum because when it works, it vacuums carpet extremely well. As long as you know it's limitations, you will be happy with it.Strengths: It vacuums as well as some normal upright vacuums.1. It cleans carpet extremely well. This is because of its full brush, large debris bin and HEPA filter. Pet fur, dirt and long hair don't stand a chance. Our 2-year-old Roborock can't vacuum up (on carpet) what the Dyson can, even if the Roborock ran 10 times in a row. The Dyson is that good.2. It has a large dirt bin. This is great for multiple reasons, but mainly because it won't lose suction. Most other robot vacuums state high PA scores, but what they don't tell you is that once their vacuum has picked up some dust, their filters clog and the PA power plummets. The Dyson can really pack in the hair and dirt without any issues.3. It has a HEPA filter which works well, is washable and replaceable.4. It's bagless! Yes, that means we have to dump the debris into a trashcan, but that also means we can see how well it's working. I don't know how many times I looked into the Roborock dirt bag just to see if it was getting anything.5. It deep cleans the carpet. Most Robot vacuums lost suction quickly because their little filters clog easily. This means whatever suction is available is only getting the most easily available dirt. The Dyson doesn't lose suction, so it can do a much better job getting the deeper dirt out of the carpet.Weaknesses: Dyson is awful at software!!!1. It can't navigate in a dark or dim room, and it can't go under beds.2. Don't schedule it to clean all the house at once, as it seems to crash often. Schedule one room at a time, and it does much better at cleaning and returning to the dock.3. Expect the mapping runs to take many attempts. Don't make any room naming mistakes because the only solution is to remap the entire floor.4. The debris bin is really hard to open most of the time.5. The battery life is not great, as it has to go back and charge at least one time to clean our 1,500 SFT house.6. If you've used a more modern robot vacuum app, don't expect Dyson to compete with it. You can set no-go zones, invisible walls and tell it which rooms to not use the brush (suction only), and you can set the suction level per room. That is it. It really is a bargain bin application. The app will not show the vacuum in real time and if it crashes, you get to play find and seek.7. It doesn't have AI and its obstacle avoidance is abysmal. If you have pet poo, barf, or small toys on the floor, it most likely will hit them. (We only run the vacuum after we've checked and made sure the floor was good to go.)Yes, with so many cons, it's hard to believe that we've decided to keep this vacuum, but after looking and comparing it with Roborock, ECOVACS, eufy, Shark, iRobot, Eureka, dreame, UBPET, and Narwal, we can't find a better robot vacuum for carpet.12/8/2024 - This is our 2nd Dyson Vis Nav 360 as the 1st one kept crashing and couldn't complete creating an initial mapping run. Returned it (Thank you Amazon) and got this one.Pros:It's a great vacuum when it actually works. The brush is light years better than other robot vacuums, which have that little rubber brush located in the middle of the machine. It does a much better job vacuuming than our Roborock robot vacuum.Wonderfully big bin and great suction. We have 3 cats, and it didn't have any problems picking up cat fur, litter, and dirt. We even let it go into the room where we keep the litter boxes, and it didn't have any issues with all the litter on the floor. This was something we couldn't do with our Roborock.We did a compare and let the Vis Nav run every day for 5 days. We then vacuumed with a bagless dyson to see how well it did. The amount of fur and dirt the bagless picked up was minimal. It was very impressive to see how well the Vis Nav vacuumed when it did work. When compared with our 2 year old roborock, Dyson's Vis Nav cleaning won by a landslide.Cons:The software is AWFUL!! We knew this going in, but wow, the software is terrible. Dyson might be a vacuum company, but it is not a software company, clearly evident by the lack of features, bugs and poorly designed interface.The vacuum crashes 1 out of 5 runs (20% of the time in our experience). (I.E. It just turns itself off wherever it's at). This vacuum model has been out for 2 years, and they still can't even get it to run correctly. Not a good customer experience for sure.The mapping is atrociously bad due to the VSLAM tech they used. It took 2–3 tries just to get a single map complete. Plan on the vacuum taking at least an hour to do it's mapping, even using the latest patch RB03PR.01.08.005.During the mapping, you will need to prevent it from gaining access to anyplace where cables are on the floor. (You know, that spot under your computer desk with tons of power cords and cables.) If you don't block those areas off, the vacuum will dive head first into that cable mess and then get stuck. Once it's stuck, the mapping is over, and you have to start all over again. If the robot crashes while mapping, you have to start over. If the robot stops for any reason, you get to start all over again.When it finally completed our first map, it somehow missed a bathroom and walk in closet. The only way to add the missed rooms to the map was to delete the map and have it do another mapping run. All in all, a very poor experience.VSLAM navigation is terrible. It spent a lot of its time moving and then stopping, for no reason. We laughed and said it was "recalculating", like those old GPS devices in the early 2000's. It constantly got lost and if it can't find where it's at, it crashes. Dyson needs to switch to LiDAR or something else, as VSLAM navigation belongs in the 1990s, not 2024. One example was the vacuum spent 10 minutes trying to fit in between the legs of a chair when it was physically impossible. We had to make several no-go zones just to keep it out of trouble.The map software is ok if the vacuum manages to get all the rooms you want, but it certainly needs some work. I accidentally named a bathroom incorrectly, and there wasn't any way to fix it without deleting the map and have it do another mapping run. Note: the Vis Nav can't add rooms to an existing map. It will vacuum there, but in the software, you can't name it.All in all, don't waste your money or time on this vacuum until Dyson can hire some real software engineers and swap out the VSLAM with a more reliable and functional technology. We will be returning this vacuum because it's just not ready for customers.