12V Linear Actuator High Speed 14mm/s Linear Motion Actuator 220lb/1000N Electric Actuator 12 Volt IP54 Waterproof Linear Actuator 6 inch with Switch

Our fresh water tank and pump is underneath the bed of our camper along with some extra storage space. To gain access to this area, there is a hinged lid beneath the mattress that is held up by two gas struts. Those struts worked fine with the stock mattress, which SUCKED, so we replaced it immediately with a nicer (heavier) model. That extra storage space is where my wife wanted to keep the extra sheets, towels, etc so it needed to be easily accessed. The new mattress was too heavy for the gas struts, and a powered solution seemed in order, not to mention I've always wanted an excuse to use linear actuators. I bought these to replace the gas struts and installed them. They are controlled via the included momentary toggle switch at the foot of the bed. They work great, but most importantly the wife loves it.

Installed on my lawn spreader that I pull behind my zero turn mower, works great.

This actuator appears as shown and works. It is not as robust as more commercial grades but our use is for a low load R&D project so it will work fine at 1/10th the price.

Very nice. Animating my wolf man for Halloween.

This actuator works as it should. No issues.

Bought in February. Used less than 1 month. Opens great……..Then it closes itself. Will NOT stay open now. Used less than 1 month & not used even everyday. CANNOT contact SELLER. UPDATE………..June 20. After getting the information to be able to contact the company, they are standing behind their products and are sending a new actuator to replace the one I had a problem with, Definitely RECOMMEND this company!

Works as it should dont see any initial problems at all. Box has everything in it needed to mount and wire up even the mounting bolts and wire connectors to the switch. You will need a small bit of wire to complete the switch depending on how you want it to function. The speed is thankfully faster then i expected but it won't brake any speed records. If you want fast keep looking takes a good 5-6sec to fully extend. Oh and as an FYI it will run off an 18v drill battery lol. Worked really well for testing befor wiring it in permanently.

The problem with these actuators is not that they are extremely slow, and it's not that they're not waterproof. The biggest problem with these actuators is that the mounts are cheap. I have been through three of them now where the actuator itself does not fail, but the little mount on the bottom snaps off with the slightest bit of torque. So when you put this on any tool that's actually going to put some Force back against it, it will break every time.

Worked very well for my project and surprisingly fast👍

Easy to install, ample strength.

These linear actuators work well and suited my project nicely. They are a bit noisy and slow however.

Used on my JD2305 snowblower chute. Now I have full control from in the cab.

C'est le 2e que j'achète et ça brise après 1 moi et demi !!!!!! Juste après la période de retour possible! Ne gaspillez pas votre argent avec un produit dont le moteur lâche après quelques utilisations !