MOD Complete MDC99008 CO2 Beer Regulator Dual Gauge Draft Beer Dispensing Kegerator Heavy Duty 0 - 60 PSI - 0 to 3000 Tank Pressure CGA-320 Inlet Connection 3/8" O.D. Outlet Feature - Easy to Use

It works but is rough and the tank pressure gauge is not accurate. Mine has shown empty or nearly empty twice but the tank has plenty in it. Had to disconnect and reconnect and it is accurate again. Almost like a leak around the gauge but tests show no leaks. To set the pressure for the line, you have to turn knob in just a small amount to go up in pressure, but if you need to go down, sometimes you have to back it almost all the way off and start from zero and go up. I would not buy this one again.

It worked great for about a month. Now the safety release valve keeps springing at random. I've refilled my tank several times and then several days later it'll empty itself seemingly at random. My house is temperature controlled, CO2 stored properly and all that. I haven't had any issues with other regulators. It's annoying to wake up to an empty tank because the regulator decided to release everything over night.

Received a while back and wanted to wait to give a full review. This has worked great as a replacement for my previous one that is in need of repair. I do like the knob for adjustment of pressure as well as the locking nut to set in place so even if it gets bumped it won't change the pressure. Feels solidly built and would definitely recommend.

As advertised. Good quality product. Replaced my single gauge regulator with this product and now I can see the high pressure (in the tank) as well as the low pressure (output) which is exactly what I wanted. Gauge housings and lever of shut off valve are plastic but everything else is solid metal built. Regulator knob (controls output pressure) is smooth and easy to dial in the right pressure. Shut off valve also operates smoothly. Can't speak to durability, but very pleased so far.

I love how solid this gauge feels, my neighbor went with a cheap CO2 gauge and he has been having a lot of issues with leakage, and his cheap gauge has a crappy safety pressure release valve that goes off at low PSI. I cranked my PSI up to 45 with no issues at all, I had carbonated beer within an hour. Neighbors batch took a week to carbonate. One thing I do recommend is securing your CO2 tank to something (in my case a home made kegerator) as the gauge is much heavier than the cheap aluminum Chinese gauges you can find elsewhere. Very happy with the product would definitely buy again! The vendor was also great to deal with when I had any questions.

Pretty solid. Instructions are a bit hard to read because of how small they're printed.But the gauges are easy to read and the whole thing is pretty simple to use.

Works as described, and does its job well. I wouldn't buy any different regulator than this one, but two things were a small concern. There wasn't any documentation with the regulator, or at least none that I could find in or around the box a week later. I wanted to know if it was possible to change the pressure relief valve setting from 45 to higher. It is possible, but you need a special tool like a flat head screwdriver with a notch in the middle to do it. I was able to fashion my own tool to do the trick by spreading out a lock washer and clamping it with a lock pliers to do the trick but it was a little difficult to sort out what needed to be done on my own having no experience with regulators or pressure relief valves.. Also the regulator output pressure knob on the face of the regulator turns more difficult the higher the pressure. I ended up using a wrench to adjust it by the end. Other models I've seen have a easy to grip handle, whereas this one does not. That being said, you only need to adjust the output pressure once, and then never again, so it's a very small issue. Otherwise I'd highly recommend this regulator. I love it. P.S. The output pressure dial goes up to 60 and normally trips the pressure relief at 45... by adjusting the relief setting I can now carbonate up to 52-55 range, and it does make a noticeable difference in my opinion.

Seems to be well made and accurate. I am able to make small adjustments and the gauge reflects the small adjustment, rather than a large pressure jump all of a sudden. Would buy again.