BACOENG 3.6CFM AC Vacuum Pump and Gauge Set - HVAC Vacuum Pump Kit for Mini Split System for R410A R22 Refrigerants - w/ R410a Mini Split Adapters & 3x5FT Hoses

The Bacoeng R32 vacuum pump is mighty! It pulls a vacuum in a very reasonable period of time, and runs impeccably. I am impressed. It has no problems going to 100 Microns, evacuating the mini split system with ease. The hoses are of excellent manufacture, the included analog gages are well built and the carring bag is icing on the cake. This Bacoeng R32 vacuum pump kit should serve any serious DIY well. I

Performed vacuums on 4 or 5 mini Splits with this without any problems. Good little set of gauges and vacuum pump. Does not leak also ran some nitrogen pressure test through these at 300-300 psi a few times they are accurate. This is compatible with minisplits but you will need the adapters. Great starter set for DIY guy.

Packaged well. Pump works well out of box. Very quiet while running. Gauge set looks a little cheap but gets the job done. Not bad for price. Would recommend for someone who is only looking for something to work for a few jobs. Not for long term use at this price point.

This worked for me to hook up the split myself instead of hiring an AC man since the $15,000 AC was hooked up by Royal Air wrong I just don't trust AC men. And all want money and make it clear that Okinus & Royal Air should have mercy because they should know it was wrongly hooked up. Such big ACs/Heaters should have two wires or else they leak and can be a fired hazard. Well, this will save you the awful news. Just follow the instructions for your Split on any Youtube or instructions. Cheaper than taking another chance on expensive ACs with unscrupulous uncaring companies.

I found nothing I didn't like about this well made kit. It worked to install my mini split which saved me hundreds. Easy to use and no leaks found. If you have to charge your unit, you may need an adapter for the type refrigerant you use. Nice storage bag heavy duty canvas and heavy duty zippers. I would have liked more of the oil for the pump, but it did fill to the halfway mark, so I have no clue how it uses oil, but it was good for my one use and probably the lifetime... I'm probably wanting too much. So, save some money, watch a Youtube mini split install video, and follow that for your install. This will also help to charge your auto a/c, but I have no idea how to do that. But, now, I'm an expert at pulling and holding a vacuum on a mini split and opening the valves to release the precharged refrigerant. GET IT...

We used this to install units in our house with no trouble at all it worked great.

So I bought this to instal my new mini split. First time all went well it pumped down to 500, then I relised i had my meter on the wrong gauge center manifold port going to the pump, so started over after correcting by changing micron meter to the blue side. Then it never would get to 500, stalls at 1700 and even rises. I notice when I turn the blue gauge off it lets all the vaccume out almost instant? I'm not an expert at all, but that can't be right? Closing it shouldn't make it lose(or gain in this case) pressure, but it does. I'm frusterated but will edit after I contact the seller. Now I dont know if it's the pump and or the gauges or if it's something else entirely. I suspect gauges for sure for one thing. This wasn't as easy as I thought it would be.

Thing was great came with very thing needed to start vacuuming mini split would recommend to anyone.

Well made ,sold through Amazon in uk but absolutely will not work in uk ,110 v not 240v here in uk,so unless you have a spare 110 v transformer knocking about do not buy in uk .

110 volts. Beware if you are in the UK