Howaoo Compressed Air Line Kit, 1/2 inch x 100 Feet, HDPE-Aluminum Compressed Air Piping System for Garage Connect Air Compressor Install Kit, Leak-Proof & Easy to Install Air Compressor Accessories

Easy to install and shape around corners. Have use it several months now and have no leaks and works great!!

Used to extend a compressor line in my garage. Had to run about 30 feet around a corner and through a wall. Did it in one continuous run. Was easy once I stopped using the supplied drywall fasteners which were just to thin of plastic to hold. Fittings, tubing, and the rest of the package was of good quality. Lots of options for taps, and a fair amount of fittings for a basic install.

First time having a compressor so I bought this 100ft 1/2" kit to dry the air and filter impurities. It was really easy to install,very easy to bend tubing and right off the bat no leaks, just use 3 or 4 turns of ptfe tape and apply some yellow liquid ptfe on top...Perfect fit....Love the blue color of the line we will see how long it lasts

1. Needs more switch of direction fittings.2. The manifolds for the air outlets provided don’t seal well, with provided plugs. Better to purchase actual NPT 3/8” plugs.3. The 1/4 turn ball valves provided, actually restrict the amount of air to be used. I replaced all of them with an actual 3/8 ball valve.4. The drywall anchors and screws provided are cheap and fragile. Broke a dozen screw when tying to use them.5. Need a slim 15/16” or 24mm wrench to tighten the fittings into the manifold. The fittings will need to be tightened all the way to the body of the manifold. In order to seal.Only bright side, is the pipe and fittings do seal well. I have no leaks on any of those. Only the plugs on the manifolds. I did use and industrial strength thread sealant. Not the thread tape they provide.

Very wellmade easy to use

The tubing and compression fittings are of decent quality, as are the threaded aluminum blocks. The threaded fittings, however, are not standard NPT, so they require tape, pipe dope, sealant, etc. to get to seal into the aluminum blocks, and they won't fit correctly into standard NPT fittings. They also require a very thin 15/16" wrench to tighten to the block, which most of us do not have. So you will find yourself trying 20 different types of pliers and needle nose vise grips to get them halfway snug. But you won't realize any of this until you try to assemble, because there's no instructions included. The screws provided are super brittle and snap off very easily. Plan on throwing them in the trash and buying some decent #9s from the hardware store. For the price it's hard to complain too much. Just be aware of these issues.

Nice system for garage or small shop. Tubing is well curled when you get it and must be straighten! I used the hole in 2x4 method and it work pretty good. Once up you can push on it some to further straighten runs slightly. Fittings bottom out in mounting blocks due to loose tolerance on either male threads of fitting or female threads cut into aluminum block. Use plenty of pipe tape and pipe dope to prevent leaks.

Awesome. Buy it buy it. Get extra fittings in your kit install. 2 hrs. No leaks ice cold air