MasonryDefender Patio Paver Sealer - Low Gloss, Water-Based, Clear Sealant for Stone - 1 Gallon

This stuff was great. I had no problems putting it down. I'm 70-year-old woman and I put it down myself or my back patio. Just follow the directions and it came out beautiful. Nothing bad to say about it Yes it's water resistant. It went on smooth and no problems

Great. Easy to apply. Looks great. Hopefully, durable.

I applied this using a roller and brush (the pump garden sprayer wouldn't work - likely a poor quality sprayer). The sand comes out of the cracks and onto the brick with this type of application, leaving a rough texture. Not a big deal though, as long as the sand stays put. However, it took WAY more product to cover my small patio than what was stated on the package (at least twice as much) when using this method, and still didn't get into the space between the cracks. I bought a second bottle to finish the job. The second round, I went over the bricks to dust off as much sand as possible before it dried, so there weren't clumps of sand sealed in top of the bricks. I also went through with a squeeze bottle filled with sealer and another filled with sand, to fill in the areas where the roller had picked up too much sand during the first go-round. I wish I would have known this "roll-brush-fill" method the first time, it would have resulted in a much nicer patio, but it doesn't look bad the way it is. I really like the low gloss look. High-gloss would look out if place with this rustic brick patio. I recommend this product for patio projects. It's sealed and protected without looking fake.

I buy this every year to seal my brick walkway after applying sand as grout. It hardens the sand and makes the whole thing water repellent. It’s expensive but it works

Perfect product for my patio refurbishment project👍👍

Nice shine and not slippery. Water beads up and does not soak in to the brick.

I used on a couple of small brick walkways. Follow the instructions and try to avoid the rain for at least 8 hours. The product has held my sand joints steady through at least 3 heavy rains. One coat on, wait 2 hours and put a 2nd coat on. I used a pressurized spray container and then used a paint roller to even it out. I sprayed a little heavier on the sand joint but covered it all with the product. It’s a great buy and looks fantastic.

Just okay, the video gives a killer shine on your pavers. it was really hard for me to tell a difference, put on the concrete. It gave a shine, but I really needed my pavers to have a shine and to be sealed but that didn't happen.