DEWALT Diamond Blade for Porcelain Tile, Wet/Dry, 4-1/2-Inch (DW4765)

I got this diamond blade to cut ceramic tile and it worked well.

I bought these blades to use on a cheaper wet saw I had. I am replacing the tiling round my fireplace. I am laying 12" marble tile. These blades come with a brass fitting so you can use on a 5/8" or 7/8" arbor. That was very useful. I cut very slowly and these blades were unbelievable. I had purchased two of these Dewalt blades, an MK (159402 MK-99) blade and a Concord blade (CTN045A10SP); but used neither of the other two. This Dewalt blade is awesome, and I'll use these for my next job(s). The cuts were straight, and I saw no chipping on the end of the tiles. To avoid the end of the cut chipping I did one of two things; 1) butted a scrap tile up to the tile I was cutting so the blade cut right into the next piece or 2) made a small 1" cut on one side, flipped the tile over and then made the long cut, and when the long cut met the first 1" cut it cleanly broke through. Hope this helps!

I bought this to help with a bathroom project requiring cutting slate stone tiles using an angle grinder. After watching some youtube videos, I ended up buying some additional protective equipment. Goggles, a protective face mask, and thick gloves. And a dust mask. The blade worked extremely well, cutting through the slate easily. The process generates a LOT of dust! But the blade itself was excellent for the job.

I had been buying odds and ends and tips for my dremel because I had to do just a small cut. What a waste. Got this blade and put in on my Ryobi 4.5" angle grinder and I was done within minutes. Great blade worth the price. I should learn to not go on the cheap sometimes, but happy I have this blade now in my repetoir! Definitely recommend and would purchase again.

It works okay. I found it will chip some ceramic tiles despite using tapes and or water. For the most part, you can hide the cut sides. To be fair, I haven't found a blade yet that doesn't chip the tile at some point. It may not necessarily be the blade's fault since this is being used in an angle grinder which may be turning the blade too fast. Some experimentation is in order.

Reliable and excellent quality. It's Dewalt!

I needed to remove one wall of 1960s era tile laid over mortar embedded with wire mesh. This blade cut through all of it like it butter. I made several vertical cuts and literally just grabbed the large pieces, tile mortar and all, and pulled them off the wall. Classic case of having the right tool for the job (good blade in an angle grinder) making a very difficult task quick and enjoyable.

I used this for some tile cuts during a bathroom remodel. Works wet, or dry. One bathroom later the blade shows no wear. It's sure to outlast me. I'm going to list it in the will.

Cuts a better than expected line - fairly clean. Does nice job in smoothing off any rough edges. No sign of losing its edge after about 15 cuts. Seems to work best with multiple shallow cuts.

Value for money.

Signori posso dire che ho tagliato un piatto doccia in marmoresina senza nessun problema, ma cmq penso che si potrebbe tagliare anche le piastrelle di qualsiasi tipo senza problemi. Direi che va bene 👍

Perfect for my tile job

This is such a good blade for cutting porcelain tiles. Very easy to get a nice clean edge and cuts really well. Not cheap, but well worth it.