







🔥 Seal in precision, seal out the chaos! 💨
This laser engraver enclosure offers a spacious 28.3 x 28.3 x 15.7 inch protective cover compatible with major laser machines. Featuring a 4000 RPM exhaust fan and triple-layer smoke pipe, it effectively removes smoke, odors, and noise. The fireproof, dustproof design includes a thickened PVC window with blue light filtering and integrated LED lighting for optimal visibility. Easy to assemble with upgraded metal supports, it ensures a stable, safe, and clean engraving environment.




A**D
This is a large enclosure that works very well
This enclosure is very sturdy and is a complete enclosure (bottom, top, sides, back and front. It is large and it houses my laser that has 400x400 cut area. The included fan and vent house work really good and can be attached in either side. I did 3d print an end for the house for the window. The light included is also really good. Only thing i would like to see is a cross bar across the top middle as the canopy sags some, but other than that very solid. The frame is easy to assemble and made of aluminum so very sturdy.
C**A
Fit was plentiful room and price great
Fit my Aufero laser2 works great to blow the smoke etc out . I love not having to use glasses.
T**O
Works, could be better.
An enclosure is needed and this one works. Be aware that this listing is a Creality Enclosure 2.0 by default, but you can select a SKY branded one that also includes a light for a few dollars less. They appear to be the same except the name and the light. So for $5 less you can trade the Creality name for an LED light.I purchased the Creality Eclosure 2.0 branded one. It is easy to setup and gives ample room for the wiring and such. I hung the air hose from one of the metal rails on the top so it doesn't get caught up sitting on the table. The door opens up all the way across the top to the back of the enclosure allowing very good access. The zipper works very well, not sticking or snagging along the way.Not all is good. If you have OCD then you will not like the permanent wrinkles in the window plastics from being folded up in the box. The fan wires are affixed so that if you tug on it you are tugging against the solder connection so do not tug on the fan wire. I wrapped a couple rubber bands to help keep it from being tugged. The fan is cheap but it seems like it should work ok for short runs. They do not include the window adapter. They also expect you to just use the metal fan guard on the inside of the enclosure up against the fan on the outside, with the enclosure cloth sandwiched in between them, without any flange in front of either - not the best for air tightness and ensuring trouble free fan rotation. Fortunately someone has provided a solution for this with 3D print files available for free online. I got the Creality enclosure with no light provided but I had a 5V LED Rope light that works good for this.You can download free 3D Print files to make the flanges, the hose adapters and even a complete window insert. Search for Creality Enclosure Adapters or Sky Enclosure Adapters. You can see the gray and purple parts in my pics are the 3D printed ones. There is also a complete window width insert not in my pics that can be printed as well.I give 4 stars for this, it works good by containing the laser smoke and smell but could have been better. The hose ends were just cut with wire poking out and not wrapped and sealed. They should have included a couple flat flanges to sandwich the enclosure material good and maybe even a window insert or a link to a 3D print download to make one. In my pics you can see the gray and purple parts I 3D printed to improve the fit and seal. You can see the big rubber band I put around the fan so as to not have the wire tugged on. No switch on the wire btw, you have to plug and unplug. They could also have chosen a flat thin box so as to not fold the window plastic but chose narrow thick box.
P**Y
The perfect upgrade for my laser cutter. Excellent fume extraction, and safety features.
This is something I wish I had bought sooner. It took care of the smell problem with my old homemade enclosure, I can see the work with the inspection panels, very durable build, and easy to assemble. Definitely worth the investment. The size is PERFECT for my Ortur Laser Master 2. It's even flame retardant. Definitely built with safety in mind. No cut corners.
S**R
Great low cost engraver enclosure.
Great for the price! I was not expecting total containment of odor since this is a soft zipper enclosure. It does a good job to be honest. I 3d printed an adaptor to vent the laser out of my window. The included fan does a good job of pumping the smoke out. Get the non branded version and it comes with a free light bar. I am using this with a Phecda/elegoo 20W laser.
L**D
2 pros and 4 cons
After the tight assembly the cover seams to be a little on the flimsy side the zipper part falls down inside and will sometimes move your work around, the big con is the fan it’s way under powered and I guess I missed it but it’s a small 3” that may be why it doesn’t draw smoke out to fast, this thing is huge had to rework my 24” bench to fit this 30” enclosure just not to impressed with this for the price may be returning.
D**S
Possibility of missing parts
The seller was amazing in getting me a replacement so I could use the enclosure. After looking through forums and facebook groups, Creality hasn't quite nailed down making sure everything in the box is correct on their enclosures.The enclosure itself is not bad at all. It won't compare to a custom build or pricier enclosure but it does the job advertised. You will need to do some extra work to seal the enclosure around your bench/stand so smoke does not escape from the bottom. It was easy to assemble once I had all of the correct parts. The zipper is well sealed and there's plenty of space. The front, top bar gets in the way when trying to work inside of the enclosure and I'm hoping to figure out a way to remedy the issue so I don't have to work around it.
D**3
Very nice quality and performs well
This engraver enclosure is very nice quality. There were no assembly instructions however it wasn't too hard to figure out. I saw a review stating that they used a clothes iron with a towel under and on top of the plastic windows in order to get the creases out. I did the same and it turned out pretty good. The fan isn't super strong but it works well enough to get the fumes out. The added light is bright enough to see what your working on. I really like that this completely seals up, unlike some other enclosure I was looking at that left the bottom open. The duct is about 4-5 feet long so I was able to run it out the window with a board I cut to fit the length of the window and cut a hole the size of the duct. I think it's hard to beat the price for the quality and functionality of this enclosure. I highly recommend it!
Trustpilot
1 month ago
1 week ago