Towing Mirror Turn Signal Lights LED Assembly Compatible with F150 2009 2010 2011 2012 2013 2014/for Mark LT 2010-2014 (Smoked Lens Yellow Light)

I installed these Aexploer Side View Mirror Turn Signal Lights on my 2013 Ford F150 and they are a good looking upgrade that is easy to install and the parts fit correctly it really is a plug and play type installation.I must make note of the fact that not only are they an appearance upgrade they are also a safety upgrade as well.Let me explain , on my 2013 XLT although the turn signals are in the mirrors there are only amber reflectors on the back of the mirror.Now when these Aexploer Side View Mirror Turn Signal Lights are added if one of your front turn signal bulbs fail as they eventually all do at some point in time, a vehicle in oncoming traffic would be able to see that I was signaling to turn .If you have not done this before I would suggest doing as I did and look at a few youtube videos to see how it is done.The lights are bright white LED and they are highly visible even in the daylight .

I installed these on a 14 Raptor. There are no instructions included with the package, so good luck.It is a pretty simple install. Pop the old solid reflectors out, run the wires into the housing, then clip the new signal lamps into the slot. Pop out the puddle lights to get access to the wiring, and decide which wires you'll splice into. I ran a power line from the turn signal into the door so i can use these as DRLs and turns. If you connect them into the power/heated mirror, or the puddle light, you'll have different results.4 of 5 because it really is a DIY/FIOY (Figure It Out Yourself) kit.

These lights are a nice update to my older F150. Things to know to install them since they do not come with instructions: Pry out the existing front reflectors, pop the circular cover off the bottom of the mirror. You can reach in with pliers and or your fingers to unplug the rear turn signal leds. Feed the wires through the holes when the old reflector snapped in. Once you have the wires reachable from the bottom hole you can attach the black connector to the wye cable. Attach the other part of the wye to the original leds and to the original connector. It looks very cool. In my case the leads broke off the original leds so they are not going to work, but I don't mind. The new ones look great.

Nice LED mirror lights for F150s. I needed to replace my turn signals on the back side (where you see the mirror) and didn't want to rip the mirror apart for just those. These went along in good compliment to what I was doing.Make sure you make the forscan edits to be sure the error/hyperflash isn't an issue

This is a nice upgrade to your factory mirror. Easy to install.