3M Xtract Cubitron II Net Disc 710W, 220+, 127 mm x NH, Die 500X, Purple Ceramic Precision-Shaped Grain for metal, wood, paint, primer, fillers, fine finishing, 50 per Package

Cubitron is the best sandpaper in my opinion. It lasts longer whilst cutting quickly without clogging and leaves a nice finish. Definitely worth the extra over the cheap and cheerful stuff

My favourite sanding discs, tried a few others but had issues with them sticking to hook and loop pad on sander. These never fail to stick, last decent length of time and good value when you buy in larger volume.

Really good and fairly long lasting

Who likes sanding? Normally I hate sanding but these are an absolute game changer and a joy to use. Big claims for an abrasive but genuinely really impressed.I used a piece of very rough sawn not planed hard maple about 500mm X 200mm as a test and used the 80grit disc and in under 5 mins the test piece was incredibly smooth.I accidently got these 150mm discs while my sander is 125mm discs I was able to trim these to size with scissors with no fraying of the side of the disc.Disc sticks really well to sander base in my case a Makita.I do a lot of sanding usually hardwoods and occasionally ply and painted finishes on ply with a primer and these discs have performed superbly on all tasks and definitely produce less airborne dust that other abrasives.Have already ordered the bigger boxes of 80 and 120 grit for the workshop and only bought this pack for testingThese are pricey but definitely well worth it doing a better job in a quarter of the time and I think they last longer than other abrasives too.

I've been cheaping out on sandpaper for years always favouring quantity over quality. I figured it didnt matter how long cheap discs lasted because if I could afford to replace them 5x as often anyway. These Cubitrons really do just peform better though. They remove material much quicker and more aggressively than the stated grit suggests and yet somehow they still finish as expected if not higher (e.g. The 80 grit cuts like a 40, but finishes like an 80+). This means you can sand with less stages AND each stage is significantly quicker, which saves a ton of time and effort. They last much longer than cheaper paper, although I'm not convinced that they last 6 - 8x longer (or whatever 3m claim), but they peform so significantly better, that the exact number doesnt really matter and I won't be going back to my old cheap paper ways.

Worth the money. Simply the best sanding pads. Last for ages, don't clog like cheaper ones. Work well with dust extraction.Will save you money in the end.

Cubitron is the best sandpaper in my opinion. It lasts longer whilst cutting quickly without clogging and leaves a nice finish. Definitely worth the extra over the cheap and cheerful stuff

Much more robust than cheaper "traditional" style discs and I think the mesh gives better dust extraction, but I haven't measured it so it's more of a perception than a fact.4/5 because even without pressing down on the sander I find that the centre of the disc wears away considerably quicker than the rest of it.A minor negative is you can't use them for hand sanding. Not what they're designed for I know - but i've often just grabbed the normal style to give something a quick rub over and you can't use these for that.

Das ist wirklich top Qualität, sogar bei geölten Oberflächen .

Bon disque si vous mettez l aspiration et surtout seulement à plat pas d arêtes ou bombes. Il a une bonne durée de vie +- 25 minutes

Qualität pur und der Staubabtrag ist super

I didn't know about this sand paper until I saw it on a video on YouTube. This stuff is leaps and bounds better than any other sand paper I've used. It's also easier to see when you need to replace it, unlike most other brands.

Riktigt bra slippapper. Har använt 125mm i några år och tvekade inte på att köpa samma till min nya 150mm slip.