TP-Link TL-SX1008 | 8 Port 10G/Multi-Gig Unmanaged Ethernet Switch |

Switch is good and working solid. I have worked with 2.5 gbps and 10gbps at same time in different ports. It’s easy to use and setup. I am using it my home-lab.

Good definitely buy it

One of the biggest known issues with this unit is the cooling fan running at high speed and creating a lot of noise for some environments. I personally have not had any problems with the fan speed ramping up with an ambient temperatures ~22°C with other network equipment both under and over this unit. All Cat6 cables less than 53m length with 10gBe network adapters immediately auto negotiated at those speeds. One cable that exceeded the 53 m cut off was upgraded and immediately negotiated at 10gBe.

Excelente velocidad de Transferencia de datos

Hooked it up, and got 5 gig up and down with the leds showing proper speed. Fan is noisy, but unit is good. I put my networking equipment in a closet so I do not hear the fan but it would be annoying to be next to it all the time. The fan noise is more of a whine in a pitch that is not loud but annoying. Shame they dont correct this really since the unit is basically good and inexpensive. The fan is only about an inch to two in diameter located at the end of the unit. Its not a deal breaker by any means.So the fan is annoying because of the whine, but its not the fan itself that is defective its the fact the fan exhaust is behind a restriction. So the way the cover of the unit is designed it has a very small area for the fan to vent out of. That grate or restriction in front of the fan causes the whine, take that out and the fan goes from a whine to a fan noise which is much less annoying. While still not being silent it is much more bearable and as a side benefit the unit vents much better and stays cooler, which may add to the life of the switch. It takes a few minutes to do with good snips but be careful about the wires on the lower left of the fan itself. I did not take off the housing I snipped it with it on. If you have trouble visualizing this and my pictures are not the greatest go the guy who wired in a fan and see what I am talking about. I did not want to buy another fan or take the unit cover off but this seems to me to be a win. Try of course at your own risk and probably does void the warranty, although I would argue that the unit works better like this and the unit was not opened. Just careful to not allow the fan blades to get jammed by something being put into the fan since it is now unprotected.

Good output and speed unmanaged easy to use Thanks

Works great. Plug and Play. 10G gear prices need to keep dropping though!