Roll with Confidence! 🛞
The 40-VIR-0415-R 40 Series Plate Caster is engineered for heavy-duty performance, featuring a robust 700 lbs capacity, a durable V-groove iron wheel with roller bearing, and a corrosion-resistant zinc plated finish. With versatile mounting options and heat-treated components, this caster is designed for longevity and smooth operation in any professional setting.
F**N
Unexpectedly nice. Good bearing, good lube setup
These are fantastic. There are two zerk fittings (one on wheel hub, one on shaft bolt) to oil both sides of the bearing. Everything is very heavy duty. My application required me to ditch the plate/frame and use the wheel alone. If you do this, note that the bolt is special and you probably don't want to get rid of it. It has a zerk fitting on the head and is hollow with a hole for grease to flow through to the bearing. It is long enough to go through the frame, two thick washers and the wheel, so if you are looking for a low profile application, you'll either need to cut the bolt down, rethread it (possibly) and possibly plug the tip if you cut enough off, or go with a normal bolt and just hope that greasing one side of the bearing is enough.
K**1
Will rust alittle. And I live in Florida
Works as expected. Did get some minor rust on wheel right off the bat. What's that about. That's why 4 stars
B**4
Too big for our purposes
I bought this for our sliding gate for our fence and was shocked to see how big and heavy it is. If it were smaller, it certainly would be appropriate to move our "chicken wire" type of gate; however, it is not small at all and we would have to lift the gate to put this caster under it. The cost of returning it would be way too much so we are keeping it.
A**R
Ruedita para portones de 4"
un par de ruedas muy robustas, engrasables, bien diseñada
R**.
Sturdy, well-made product.
This V-groove caster was exactly what I needed and fit the description perfectly. Good sensible packaging/shipping.I will recommend this as a source for related parts, etc.
K**T
good for the job
needed for some pulley work for a rope thing I'm doing, strong and sturdy! using to haul up 100lbs with a rope. we'll see what happens
F**I
Only $10.00
I was searching for small v castors for my lightweight gate so I assumed for $10 dollars they must be small nylon castors. Turned out to be full size cast iron castors with grease fitting. I had to redesign a little to accomodate these castors
E**A
Works as described.
It really made our long outdoor gate so much easier to open.
Trustpilot
3 weeks ago
3 weeks ago