Yocaher Longboard Skateboard Trucks Wheels Combo Set 71mm Wheels + 7"/180mm Heavy Duty Aluminum Black Trucks, Bearing, Riser Pad, and Skateboard Longboard Cruiser Hardware

I set up a pintail cruiser deck. I put about a dozen miles on it today. My deck is 9 ply and the hardware is the perfect length to mount the trucks with the riser. The bushings are a good hardness. I can carve as hard as I want and don't get wheel bite. The wheels are great for a cruiser setup. They roll nice over cracks and pebbles. They have good grip for carving and hold momentum ok for a softer wheel. The bearings beat my expectations and then some. I use Bones Reds on my other boards and these bearings spin just about the same. Definitely give the bearings a try before spending to upgrade. Other reviews mentioned trouble with fitting the bearings into the wheel; I pressed them in with the truck like I always do and had no trouble. The kit doesn't include spacers. I plan to live without spacers for the life of these bearings.If you want to build out a cruiser, this kit is a great buy. No need to upgrade the bearings or hardware as other reviews mentioned. I ride my longboard every day and have built a bunch of skateboards. I don't often write reviews but I had been on the fence about buying this kit thinking I'd need to upgrade the bearings or bushings. I'm glad I pulled the trigger. Great kit as-is.

The bundle of gear is good and the ride is smooth when everything is assembled. However, if you have a problem, there is no one to speak with for help, despite yocaher having contact info for support.My kit shipped with a missing axel nut and nobody responded to emails or phone calls for over a week. Had to buy my own elsewhere.I recommend avoiding this company for that reason alone.

If you have a plastic cruiser board or Penny board I would refrain from these. They are an amazing product however the spacers that come with the truck set won't allow the trucks to be fitted. Meaning if you have one of these boards you MUST have your own smaller spacers because fitting the truck to the board is impossible without one due to the holes not being lined up. After spending about 30 minutes it finally works but I'm considering putting my old trucks back on in fear these will tear my board to pieces. Regarding the wheels I have zero complaints, they roll amazingly and have STELLAR GRIP. This seems kind of a niche complaint but for people who use a cheaper board like myself to get around and want this as an upgrade for better performance should know upfront that it won't work without risk

Managed to build a great looking Sector Nine board for under $120 cause of these bad boys (got the board half priced because of some light scratching on the deck, incredible deal.) I see alot of folks complaining about the bearings (and a person or two whining that the packaging "promotes drug use" because it comes in a pill bottle, some people need to learn how to take a joke) and I can't really attest to their value - I bought a set of Bones Reds (shocker, as that seems to be the bearing of choice.) Everything else involved in this set works way better than I expected (another sentence contained within parenthesis because that seems to be a thing I'm doing alot of right now.)Seriously, for $40 this is a great deal so far. I've only gotten two hours of riding in, I've seen some reviews about the wheels chipping, but they seem pretty sturdy to me. Great amount of softness to them, but still sturdy enough. One minor flaw is that once I got the kingpin tightened just the way I wanted it, the washers by the bushings started rattling. I really don't mind, some new bushings would probably fix the problem, but some people might get annoyed by it (like the types of uptight people that leave 1 star reviews for products that they claim "promote drug use." I'm sorry, I'll be nice now.)Haven't ridden in about 15 years and I was cruising parking lots at my job with very few problems within 30 minutes cause of these awesome suckas. I'm a security guard, please don't tell my boss I was skating on the job.

Got this to build a board for my fiancé, and now it rides like my $200+ boards. Only issue is with the cheap bearings, but anyone who rides as much as I do buys aftermarket bearings anyways, so I had a few sets of Reds lying around.

Amazing setup. I have made 4 long boards by hand, and have reordered these wheels for every one because of some key reasons.TRUCKSThe trucks feel real and solid, and have held up to being grinded on metal and left out in the rain.WHEELSThe wheels are AMAZING. They are grippy to the point where I'm not scared about them skidding out from under me while going 20mph+ around turns on asphalt. I am able to do 180 slides on them, but I don't think they are made for sliding.BEARINGSThese are FAST. I've done spin tests with kids around the neighborhood with their $200+ boards, and these bearings spin as well as if not longer than their expensive ones.The bolts and screws and such hold up as well as any other, nothing special there. I would reccommend spraying these with some zep45 if they start to slow or rust (I have left these out countless times in the rain, zep takes care of anything) which you can buy at a home depot. Also, if you scrub the wheels, the "yocaher" logo comes off pretty easily, which can be good or bad. I'd say if you are building a longboard, there is no better setup than these for the price.

This is the second time I’ve ordered. First set was perfect. This set is missing parts. Only received the wheels and trucks. Missing the bearings, screws and black plastic bases. I made my longboard so I didn’t open the box until today when I wanted to install the wheels.

The bushing are fine (they are not too hard)Everything else is fineExpect for the bearings. I would still buy the kits and buy other bearings. But the bearing are so bad I don't even know why they bother including themWheel are a bit on the hard side, but they are okaySome were so badly made that one of them had the side fall of almost on it's own.If this is a gift and you want that person to not like skate/longboard. These are the perfect bearing. They roll hard. They are off center, they feel like rock instead of balls. The grease they come with feel more like glue than anything else.

Aside from the paint on the hangar having been allowed to coat an axel, and what appeared to be solder in the threads, they're pretty decent. I had to remove the excess paint as it was preventing the bearings from fitting, plus I had to use my soldering iron to wick away the stray metal preventing a couple nuts from threading. Most people would have likely returned them, rather than correcting the issues. I'll update around the end of autumn, or sooner if something goes horribly wrong.

The media could not be loaded.  The parts are so cheaply made that they came broken and warped to the point where caused me to have an accident. This thing shouldn't be worth $10 let alone the 50 I paid for it. If you're cruising maybe they'd be okay but my roommate tried them and after a week on his cruiser board it was just lopsided. They're very weak material that the parts are made out of and they warp incredibly easily which can lead to people getting hurt. Amazon should definitely take them off their store.

Put these on my skateboard deck to make a sort of hybrid short-longboard (a shortboard if you will) and they've been pretty good so far. The kingpin rattles a bit when it's not super tight but for adequate turning it's almost required they be so loose. The rubber wheels are also missing small chips and few sizable chunks, though this only affects the aesthetics of the board and not the usability (it's an old s***ty board anyways though so no points off for that). They offer a soft, quiet(ish) ride and are pretty adequate. For the price having everything you need but a screwdriver and a deck makes this a pretty good choice for a casual boarder like myself

So far so good. Good quality and complete kit. But..Well, I dont know how or why it happened, but there was a razor blade freely stock on the bubble paper by a scotch tape, well hidden, so when I took the whole package from the box, I un pleasantly cuted my hand in three places. Quite unexpected.But the product is as represented.