Hyper 411 Nano CPU Air Cooler, SickleFlow 92 PWM Fan, 4 Copper Heat Pipes, 136mm Tall, Sleek Top Cover, AMD Ryzen AM5|AM4, Intel LGA 1851|1700 Brackets

I bought this cooler for my somewhat compact entertainment center computer. It fits well in the bookshelf case and does a good job of keeping a Win11 machine doing DVD playback, streaming and video conferencing cool.

Cooler Master Hyper 411 Nano: Needed something that would fit into a smaller case and cool an AMD Ryzen 7 5700X better than the Wraith Stealth I was using. Decided to give this cooler a try and after a very easy, straightforward installation I started is up. The heat sink worked better than I expected as it kept the CPU at 38C or under while at idle with the fan at 1200 RPM. Under load it rose to 58C and stayed there with the fan at about 2000 RPM. Decided to test it out with the PBO set on and at maximum load it went to 79C with the fan maxed out at 2500 RPM. At the setting I used the CPU was drawing in excess of 110 Watts and this is out of the range of my intended use. I specifically looked for a CPU that used less power and thus created less heat. But just for testing purposes the Hyper 411 Nano was able to keep the CPU within safe thermal limits. As it is, the heat sink worked better than AMD wraith by about 10C and is significantly quieter. Recommended for small form factor setups with lower power consumption.

Keeps my CPU cooler than the factory fan without all the need for liquid setups. It's also very quiet

I purchased the Hyper 411 Nano to verify the compatibility of its components with the Hyper 411R that | bought a few years ago. My main finding is that the fan from the Nano fits the 411R perfectly, as both are 92mm models. The key differences are that the Hyper 411R includes a white LED light (which I didn't want in the first place), while the Hyper 411 Nano's fan runs 500 RPM faster. The mounting brackets work for both models. As for the heatsinks, the one on the Hyper 411 Nano is slightly shorter than the one on the Hyper 411R. I could have just bought a standalone 92mm Cooler Master fan, but my goal was to check the compatibility personally. Later on, I will test this hybrid cooler (Hyper 411 Nano's fan with the 411R's heatsink) with a Q9650 processor when I assemble a classic gaming PC.

Great price. Great fit. Paired with a Ryzen 3 3200G and performs very well. I would recommend.

Un disipador de muy buena calidad, es chiquito pero cumple su función, estoy satisfecho

Was sent a used piece of junk. It wasn't even the cooler pictured. It was a silver heatsink with bent fins and dirty beyond dirty disgusting. Clearly used. Do no buy this garbage. Wish I could get a refund. Wish I could give it zero stars.

Good

Compre este sistema de enfriamiento Cooler Master por su diseño ya que es parecido al V12, cuenta con 4 pipas de enfriamiento, por estandar trae un ventilador de la marca pero se puede integrar uno adicional, me gusto mucho el diseño, es robusto lo que ayuda mucho en el enfriamiento del procesador, no es nada ruidoso el ventilador que trae, no tiene RGB pero por eso lo compreo ya que es bastante discreto, el ventilador que trae es del 92mm que un tamaño estandar, no es de los grande pero hace muy bien su trabajo, en juegos o procesos pesados me mantiene a buena temperatura mi CPU, el diseño bastante minimalista. Lo recomiendo ampliamente, si quieres algo más grande este no es.

Usando la misma pasta térmica que viene con el disipador, en pruebas de estrés en comparación con el de stock podría decir que maneja una diferencia de casi 10 grados. Creo que podría mejorar usando una mejor pasta térmica. Compre esta opcion para poder colocar una Asus Strix RTX 4070 Ti Super debido a que su tamaño limita el uso de disipadores.

Cumple su funcion y es facil de intalar y por el momento no me ha dejado mal parado, lo tengo instalado en un Ryzen 7 9700x, lo recomiendo ampliamente.

Excelente disipador por un buen precio