Question 1

I have a stud dead center where my tv will be hanging.  How do I mount the bracket if the mounting plate is only 30 inches?

Accepted Answer

TV's are typically much wider than the width of the mounting bracket, this allows the TV to 'hide' the bracket behind it.  Also, wall studs in the US are typically 16 inches apart on center but I use a stud finder(cheap tool you can get from Home Depot or Lowes) to verify stud locations.

Having said that, my recommendation would be to move the mounting bracket a few inches right(or left) to mount the bracket to the wall using 2 studs. Then hang the TV on the mounting bracket and adjust(i.e. slide) the TV to the left(or right depending on how you mounted the bracket to the wall). The result will be the TV will then be off center from the mounting bracket but centered on your wall. Since the TV is wider than the bracket, the bracket will be hidden. Good luck.

Question 2

Do you need to purchase additional pieces

Accepted Answer

I am not sure what you mean by additional pieces, but the box I bought had everything I needed to install it. I will give a piece of advice...Tighten the handles before you put it on the wall. There is not enough clearance between the wall and the tv for a large arm to go between to tighten them afterwards.

Question 3

How strong are the side supports? I'm assuming they are welded on and not just part of the same piece of metal as the flat plate

Accepted Answer

They are very strong and not welded to wall plate. This is a great mount but does not pivot sideways. Only up and down.

Question 4

Does it attach to metal studs, 24 inches apart ?

Accepted Answer

Yes. mounting on two metal studs will be fine.  Three studs are preferable.  Use toggle or snap toggle bolts rated to hold the appropriate amount of weight.  Most 3/16" snap toggle bolts will hold over 200 lbs.  1/4" bolts are recommended.  Use a third set of bolts in the drywall where there is no stud for added support.  See this video for snap toggle bolts.  http://www.youtube.com/watch?v=SC1ZuxuZ2PU

ASIN	B003WUBL0S
Best Sellers Rank	#57,734 in Electronics ( See Top 100 in Electronics ) #681 in TV Wall & Ceiling Mounts
Brand	Sanus
Color	Black
Compatible Devices	Television
Customer Reviews	4.6 4.6 out of 5 stars (888)
Enclosure Material	Alloy Steel
Global Trade Identification Number	00793795527752
Item Weight	2.5 kg
Manufacturer	Key Inc.
Maximum Tilt Angle	12 degrees
Maximum-Supported Screen Size	85 inches
Mfr Part Number	VMPL50AB1
Minimum-Supported Screen Size	32 inches
Model Number	VMPL50AB1
Mounting Type	tilt
Movement Type	Tilt
Number of Items	1
UPC	887469983453 793795521965 793795527752
Unit Count	1 Count
Warranty Description	manufacturer

Sanus Systems Vmpl50A-B1 32-Inch to 85-Inch Visionmount Tilt Mount

Details

Details

Description

Specifications

Common Questions