ARB ブラシレス ツインモーター オンボード 12V エアコンプレッサーキット

Its good. Just the packaging needs to be more comforting. It was floating around. Not wut you want when you spend a thousand dollars on something

What a fast air compressor 2 x the old one

Good

Exactly as described. It airs up all four of my 38x13.5xr20's Toyo MT's from 10psi to 37psi in 7 mins 30 seconds. I can't compare it to the non-brushless as I never had one on the jeep. Note: I installed the compressor on my tail gate as I didn't have room under the hood of my JKU with a Hemi Conversion. I ran two 8 gauge power wires (per installation instructions) and added another 8 gauge wire downstream of the fuses to the battery connection. At first I only had one wire downstream of the fuses to the battery, as the unit came that way, and I had issues with a compressor shutting off early. After I added a second wire from the fuses to the battery, it ran great with no issues.

Works fantastic. I remote mounted the air cleaners for this inside the cab to keep them away from water and that did create a slight problem with airline being too small even though I was using 3/8 line upgraded to half inch remote intake line and it’s been running great since fills up 4- 35 x 13 1/2 Mickey Thompson’s from 10 psi to 20 psi in under five minutes, that’s pretty fast to me. Do not mount this anywhere near carpet or flammable things. It gets extremely hot like a lot hotter than the previous model. It will also pop nylon/teflon air line due to heat. Time will tell if it affects my locker lines. I’d recommend hydraulic hose or at least steel braided to an aluminum block 3 feet away with a heatsink, then run from there.