APIELE 16mm Momentary Push Button Switch On Off Stainless Steel with 12V LED Angel Eye Head for 16mm 0.63" Mounting Hole with Wire Socket Self-Reset (Blue)

Accidentally came across these switches during some upgrades to my old Hot Rod. Wanted LED but most are way too bright. These have and opaque ring that is a neutral color and is backlit with a colored LED so are just right. The guilty is very high and they look great for my application. They are also very versatile since they can be wired as normally open or normally closed and the LED is on its own circuit so can be wired separately. This worked well for two controllers I installed that need to activate an LED separately from the switch to function the way I wanted. Wring them up is also simple since they come with a removable pigtail so no screws or soldering at the switch to deal with and will be simple to replace if one happens to fail. Last but not least these come in many diameters, body colors and LED colors. Available in latching style and momentary style. I used both on my project. I will definitely be using these on future projects as well.

I got a couple of these and I absolutely love them. They are really good quality and look great once installed. Wiring these up are a little confusing so make sure you mock test these first before completely installing them.

Easy to installGood functionQuick delivery

I'm using these to set a latching relay in an automotive application. A very subtle switch that looks great in my classic car. This is a very good quality metal cased switch, with a perfectly even halo LED.

This button has a good tactile feel to it. It was a bit too deep for my need though, i had to discard the plug for it, trim the leads a bit, and solder wires to the leads to plug elsewhere. I wish this could be designed a bit more shallow.

Just what I needed for my project. Fast shipping, I'm happy, and would use them again.

Excellent switch, nice LED light. As some have noted wiring instructions leave a lot to be desired. I wired the switch so the LED only lights when the button is pushed. Here’s how: Green wire from switch to power supply, Blue wire from switch to device you are powering. If device(electric fuel pump used for priming in my case) is grounded switch will now power on device with no further wiring needed. The LED has it’s own circuit which is separate from the device circuit. To wire LED to light when button is pushed bundle the red wire from the switch with the blue wire that connects to device in the same butt connector(or whatever connector you’re using). Black wire from switch must then be grounded to frame of vehicle. I cut the yellow wire and taped the end to prevent unwanted contact. This simple description would have saved me half an hour and a blown fuse trying various wiring combinations .

Nice product but I went back and bought the 22mm instead I thought the 16 would look ok22 was perfect

This switch is a little smaller than I expected but feel like a good quality switch when pressed. Simple wiring detailed instructions for different configurations. I like it!!

Glow plugs start switch

Great item, service n shipping, will buy again, Thank you!...

I use this switch to activate the center stand of my Harley

Very good quality switch, easy to wire