Divert Valve Fit 1/4 inch RO tubing with Male Adapter for Faucet

This fit my faucet perfectly after buying two different ones that didn’t fit. The valve was a bit hard to turn the first time but after they moved smoothly

Great product. Just did not fit my faucet.

Easy fit for an old Delta faucet (24mm female thread), the included 24mm/22mm nipple (male to male threads) worked nicely, unlike the nipple adapter I bought locally. Feels solid and no issues so far.The RO 1/4" tubing from Home Depot fits this diverter valve better than the tubing included with the RO system.Not all 1/4" tubing fits the diverter valve, and this is an issue with all diverter valves I've seen. The port for the 1/4" tubing has a larger diameter than it should, limiting the tubing options.Because the tubing is under pressure and not that flexible, it can crack where it connects to the diverter valve when moving things around.

Great product. Easy to install.

This was easy to install aside from the hose that goes on the side. It is a very tight fit, but needs to be in order to seal well.

This diverter valve is better than the original that came with my counter-top water filter. The original was a pull out type that didn't let very much water pass through when you were not using the filter. This one is great, when not in use, you have a lot of water pressure for washing dishes or other uses. If I had known how good this one is, I would have bought it along with the filter years ago!

I had to buy this because the one that came with my filter leaked. This one is more solidly built (metal lever whose screw had to be tightened but by being loose was returned and I bought it for under $8 as a warehouse deal) and best of all the threads for the aerator (which was replaced with a dishwasher adapter) sealed nicely with a little Teflon tape.I'm very happy with this purchase; not so much with my countertop filter purchase ;-).

I installed this valve on a faucet in my kitchen sink to divert water to a countertop water filter. The valve was easy to install, works much better than the one that came with the filter, and, as a bonus, increased the performance of the sprayer attached to the sink. The valve is sturdy, shiny, and easy to flip between faucet and filter.

Hatte schon mehrere dieser Ventile gekauft und wie vermutet ist es einfach ein Produkt, das weit ab von langlebiger Qualität ist.Bei sehr kalkhaltigem Wasser nützt sich die Kugel sehr schnell ab und ist dann nicht mehr dicht.Die Funktion ist auch etwas unhandlich. Die kleine Nase für den Öffnungsbegrenzer ist so scharfkantig, dass man sich verletzen kann.Ein Teil, das eben nur vom Billig Hersteller vertrieben wird. Man muss einfach mit solchen Dingen leben, denn sowas kommt nunmal immer aus Fernost.Ich würde gerne ein paar Euro mehr ausgeben, wenn es von einem Markenhersteller produziert wird und nicht jedes Jahr das Teil austauschen muss. Nachhaltig geht einfach anders.

Easily installed on tap with included adapter. Able to connect 1/4 line and flush my water distiller pre filter before installing it for use. Was exactly what I needed.

well made and does not leak but works as intended

Good

Don’t waste your time buying this it doesn’t fit. You need a 3/8