Kindly Note:This is not an iRobot Original product and is not covered under any iRobot warranty. The iRobot brand name and logo are the registered trademark of the respective owner. Any use of the iRobot brand name, model or part designation for this product is made solely for purposes of demonstrating compatibility. Fit Model: FOR iRobot Roomba 800/900 Series 890 891 894 860 861 864 880 870 980 960 961 964 *****How to clean the Extractors: 1. Pinch the yellow extractor frame release tabs, lift up the extractor frame and remove any obstructions. 2. Remove the extractors and remove the yellow extractor caps. Remove any hair or debris that has collected underneath the caps and around the metal axles. 3. Remove hair and debris from the square and hex plastic pegs on the other side of the extractors. What's in the box: 2set X Tangle-Free Debris ExtractorsAn Instructions
B**S
Brushes dont work
The hole in the yellow and white brush is hexagon shaped and the stem that it screws to turns while your screwing the brush on. So the brush and the stem do not fit tightly and you cant screw it on enough to hold, and the brush falls off. Luckily I had an old replacement brush that fit snug.
N**I
The extractors and the sweepers are great but the filter didn’t fit properly
The extractors and the sweepers are great but the filter didn’t fit properly. Because of that it keeps throwing collection bin errors. I put in the Roomba brand filter and the errors stopped. I measured both filters and they’re not exactly the same size. This one is slightly skinnier and a tad bit longer than the Roomba brand. Other than that...everything else works fine.
N**6
Worked initially but then mad noise
great product just as expectedAfter using now for several months I notice the beater bar internals have came loose and make a annoying squeal. I tried to super glue internal which worked for a while but broke again. Filters were good but will not buy again due to noise.
T**N
it's okay
spider brush comes loose & the debris extractors tend to be noisy at times. other than that, great purchase.
R**M
Five Stars
Came quickly, works as expected
R**1
Not compatible with roomba 890
The side brushes are not cut right to fit roomba 890. The hexagonal slot that the motor fits in is too big causing the brush part not to spin with the motor.
R**N
The extractors are not to spec and rub in my 900 series Roomba
The filters were good but the extractor stripped after 15 minutes of use. I had to return all of it and buy iRobot OEM. You get what you pay for.
K**N
good deal
as cu ood as o.e.m. parts
Trustpilot
2 days ago
2 months ago
