B&C EagleA238X113HDR/33 Offset Round Head 2-3/8-Inch x .113 x 33 Degree Hot Dip Galvanized Ring Shank Paper Tape Collated Framing Nails (500 per box)

Worked as they should , no jams , no problems

Good packaging and work great in my Ridgid Paper nailer

works great will buy again if needed

Worked great in my Senco framer. Hard to find nails for this tool now due to angle of nail but these work great and are a fair price.

The product came in with tore box and nails scattered

These worked really well with my DEWALT DCN692B 20V MAX Cordless 30° Paper Collated Framing Nailer.

These are working as they should in my Bostitch nailer.

As suggested by Amazon,, when I purchased my Dewalt DCN692 30* framing nailgun, the website insisted I needed these god forsaken things because they came highly recomended. Thinking, ok sure why not, it's been about 5 years since I used a framing nail gun, I figured what could it hurt?Boy was I wrong. I purchased 2 boxes of these damn things. In what should have been a 2 hour framing job to create the basic frame of a small 8x4 Utility shed, I spent most of the 4 hours on the project, digging jammed nails out of my brand new nail gun because the paper either was too thick, tool loose or the nail itself in the launching process into the wood, would snap in half on the lowest speed setting of my nail gun. At one time the jam was so bad, I literally had to take the entire board off of the project just to take the nail gun apart just to dislodge the nail from both the gun, and the wood. Turns out the nail broke mid launch while a second nail fired with it, causing both to fuse into the barrel of the gun and wedge into the wood.After I cleaned, fixed and re-calibrated the nail gun, and used a box of "Masterforce" brand nails.... I was able to finish the project in record time.These nails are complete trash

Parfait pour une cloueuse a charpente.

Worked well with my 31 degree clipped head CH nailer. A couple of bent nails but no jams.

tres bien

Came on time and works great