5-PC Triple Density CE Removable Armor for Motorcycle Street Biker Jackets 5PC Set Universal Size

These fit well in my riding jacket that has outlasted the original body armor components. I don’t know how well they work in a crash situation, and hope to never find out!

I'm giving this 5 stars because I think it's a good deal for the price but read on.So I put on my mesh jacket a week or so ago and my elbow protectors were down in the cuffs. Further inspection showed that they had disintegrated and that my shoulder ones were on the way out too. I went back and forth on several of the items on this site but ultimately chose this one. So here's the deal:First off, these are made of foam like you might find in a yoga mat or what campers would call a carrymat. Two bonded layers, a thick yellow one and a thinner black one. I believe these are cut from a flat piece of this material and the shaping and contouring is done with some kind of heat press. My original shoulder and elbow pads were some kind of molded rubber. They look like they would offer better protection than these but handling both at the same time, it seems like they would probably be about the same.Next up, not a single one of the ventilation holes was unobstructed. Given that for me, this is for in a mesh jacket, not a huge deal but if the holes are important to you, be aware you may be spending some time doing some remedial work. I actually chose this over another because that didn't have holes in the back protector so not so good.With respect to fitment, I had to trim a fair bit off the shoulder pads at the top and bottom (better too large than too small) but the elbow pads fit fine with a little bit of work. The back protector was smaller than my original which was made of the same material and had 1/2" ventilation holes but was still in good condition so I left it in place. I'll throw this one in a closet in case I can find a use for it sometime down the road.So for keeping a well-loved jacket in service, not a bad deal. But I think given the choice again, I would pay a little more and get some more like my original ones.

Pros:Arms and shoulders fit as expected. Foam seems similar in quality to oem. It will likely do its job in a wreck.Cons:I luckily had a good back pad still. This back pad is thinner than the other parts, small, will not protect in a wreck. I knew this would probably be the case buying this, as the price is right for the arms and shoulders. If you are looking for a back pad specifically, look elsewhere. Due to the size and how it needs to be made, this component will likely be costly.Bonus:I used the back pad as extra padding in my backpack for my laptop. Works great for that!

Feels sturdy enough . Especially for the price. Purchased this for my harley jacket and it fits perfectly.

Unfortunately, I will only know the true quality if I have an accident. So far I've put them in a BERING jacket and can only speak about what I know.The old ones were thicker, but comfortable. After several years, I am unable to remember the beginnings an compare. Never mind.- The back plate is so rigid that it looks like a wooden board: it's very uncomfortable.- The elbows fit in well.- For the shoulders, I had to cut them.

Needed to replace elbow and shoulder pads in my motorcycle jacket. These work great for me!

These pads are nowhere near the right shape or thickness to properly replace joe rocket jacket padding; can’t speak for other brands, but they are a poor substitute for the JR OEM armor. These are barely 1/4 the thickness of the originals. While they may technically absorb the same impact energy as the originals (which I doubt), they are not even close to the size or thickness of the originals. Can these be jammed into the armor pockets of the JR jackets? Sure, but the reduced thickness also makes the jacket look saggy and ‘frumpy’ as well. On top of that, the kit I received had the wrong quantity of items in it. Instead of 1 back piece, 2 elbows & 2 shoulders, I got 1 back piece, 3 elbows & 1 shoulder. Overall, almost worthless.Edit - After originally posting this review as a "1-star", I was contacted by the vendor, who wanted some more details of what my problems were with the product. I replied, giving them a few more small details, but my description in the review was pretty clear. I'm surprised that others have used these armor pads in Joe Rocket jackets without issue; perhaps different pad styles are within the JR product line?The vendors next response was to tell me that they were issuing a full refund of my purchase price. I didn't ask for a refund, mainly because I didn't feel like packaging the item back for return, PLUS I had made the pads 'un-returnable" by trimming them with scissors in an effort to make them work. But they didn't ask for the items back, they just simply issued a refund because I wasn't happy with the item.... no arguments.While I stand by my description of these pads as not being acceptable for use in (at least some) Joe Rocket jackets, I am changing my 'star' rating to a '5' simply because of the customer service. I can occasionally deal with a product that doesn't live up to expectations (it's just a reality in commerce), but good customer service is more valuable in my opinion. While this particular product wasn't suitable for what I needed, I wouldn't hesitate to buy other products from this vendor in the future.Thanks Jackets 4 Bikes.

I have an old Joe Rocket Phoenix 4.0 jacket and found the armor to be crumbled in the jacket after so many years. Not sure of the cause. This replacement pack was affordable to try soi bought. The fit in the pockets for the armor is tight. They are larger pieces than the original. The jacket is mesh soi can see the yellow a bit but I'm happy. The thickness of the armor is decent. I really don't know how it compared to the OEM since I never fell or anything. I will keep it and I think it will be helpful in a fall compared to nothing. I choose this vs the other more expensive choices because I could have just gotten a whole new jacket on sale now with me pads in them for a bit more than the expensive pads alone. I didn't trim these but it is possible to make them fit better.

Je les ai installé dans une chemise pour les journées plus chaude . Maintenant je me sens protégé

Es el segundo juego que compro. Quedaron del tamaño exacto en 2 chamarras distintas.

De muy buena calidad. Gruesas y rígidas para proteger, pero ligeramente flexibles para no molestar.Quedaron perfectas en una chamarra Apro.Ya compre un segundo juego para otra chamarra. 👌

no serviran mucho en caso de accidente, son muy duras y absorberan poco el impacto, estan hechas de un material muy economico, es hule eva (como el foamy).muy caras para el precio y la calidad

Very happy with the fit for the shoulders and elbows, back pad is smaller than the original. For the price you can’t go wrong and better than nothing at all.