Latching Push Button Switch U22A4 1NO1NC SPDT ON/Off Black Metal Shell with Green LED Suitable for 22mm 7/8" Mounting Hole (Green)

Fit and finish on this switch is great. Color is even, metal surfaces are smooth, switching action is positive and firm. The red illumination is of an appropriate level, neither to bright nor to dim. I do recommend getting the associated pigtail for this switch as it made integrating and installing much easier.The only real down side is that the connections on the switch are completely symmetrical, so you have to rely on the marked pin to determine positive/negative and does allow you to hook the pigtail up backwards if you aren't paying attention.I would definitely buy it again.

Looks incredible, works perfectly. I'm diving the LED with 3.3v and no resistor, brightness is perfect. I'm also using the matching pigtail and connector. Some were saying they were impossibly small to solder to, I would say it is easily done for an experienced solderer. You can probably also find the proper size spade connectors but why stress? Pigtails and a sheet metal "step" bit made it a 5 min install.

worked great

I was building a simple Bluetooth ammo boom box for an electronics course I was taking, and I wanted a good haptic response, surface texture, and nice looking button. I honestly spent 30% of the cost for the whole project on this button and the matching pigtail, and it was totally worth it. The click is so solid and the fit and finish are everything they promised me in the photos. The backlight is the perfect level of brightness for me when running on the output voltage of the single cell lithium battery I used. I used a 7/8" drill bit (yes, a truly massive bit) to make the hole in the lid of the box and the fit was perfect. I would suggest a "Christmas tree" bit (also called a stepper drill bit) to get the desired hole size, as it will not want to wander as much as the method I used. Buy this switch if you really want a kickass switch for a project or you are restoring something that would need it.

Really nice metal product for switching on/off devices and indicating power with blue LED. Can be wired several ways with normally closed and normally open pins. I use it in the car to power cell phone charging port so it remains off in my center console when not in use on a seldom driven car. Photo shows the switch on the left in size comparison with other devices used in car.

The switch, once you get what you order, is fine. Problem is getting the right part. Be sure you have time to process all of the returns, your going to need it.

Took me a minute and a couple fuses to figure it out but we are good now. Works as is should.

Do not recommend at all. I bought two and had unique issues with each if them.The first one had two issues. 1) It got stuck in the "on" position which meant my lights were stuck on permanently. 2) The front of the button rotated/spun around when pushing the switch so it was never in the correct visual position.The second one worked great for about 15-minutes and then the blue LED just stopped working.Avoid this product. Now I need to find a higher quality alternative.

Fits perfect in the 12v cigarette lighter plug in my 2018 Silverado. Used it as a light bar switch. Nice and clean. You can still close the cover for the oem switch as it’s nice and sleek

Perfect buttons for my marine application. I removed my old 1/4 turn Supra switches and installed these buttons and relays to switch power.They have held up in the rain and sun so far and worked flawlessly

Brighter than I expected; works good. Satisfying on/off latching mechanism. Doesn’t come out too far or go in too much either, just right. Looks as advertised, black metal and has o-ring. 7/8 pilot hole is perfect fit. Clean AF. Make sure the button doesn’t rotate, one of mine did just dabbed some crazy glue on he back, metal to plastic.

bonne qualité. Je l ai utilisé pour remplacer un interrupteur défectueux sur ma motomarine kawasaki zxi 900.s installe facilement et fonctionne parfaitement.J ai opté pour des connecteurs plutôt que de souder les fils.La lumière est d une bonne intensité.

Using for light bar in truck so far so good