Safariland Comp III Speedloader, Black, Fits J-K2S: Dan Wesson .38/357

I've used every speedloader available on the market: Safariland Comp I and II, HKS (Five Stars work the same), Jet Loaders, SL Variant, and Speed Beez. The Safariland Comp III towers over all in performance and ease of use. Injection is more positive than its closest competitor (Jet Loader) because holding the Comp III by the sleeve over the spring allows the loader to send the full force of the spring against the revolver's cylinder. No other spring loaded loader has that sleeve, wasting some of the spring force against your hand. I use them both for competition and concealed carry. They are no bulkier than a double stack semi auto's magazine and its rounded contours make it far less conspicuous and far less likely to snag on clothing than the squared edges of a magazine.

This is the fastest and simplest speed loader I have seen for range and competition use. It is a little large for concealed carry. There's plenty to grab onto when reloading quickly. I plan on buying two more of these and then the Safariland holder for all three for IDPA.

The Comp III speed loaders are excellent. Fast loading, reliable and easy to manipulate. I use them in every revolver match.

Safariland J-K2S COMP 3. A little stiff when brand new, but they break-in after 5 to 10 reloads. I've been using HKS for years and when you get your rhythm down they work just fine, but these push button COMP 3's work pretty much without thinking, just drop them in, hit the button with the palm of your hand (letting the loader drop to the ground) and slam the cylinder shut. If you are using a SPEED-BEEZ loading tray to stage your .357/38 ammo you will find that .357 works just fine, but the shorter 38spl case length will not allow you to depress the button on the speed loader far enough to turn it, I had to shave 1/4 inch off the top of mine, you might also be able to put a small washer in each hole before dropping the cartridge in so that the cartridge sits up a little higher, this is probably also true of .44mag/.44spl.

I've decided to buck the system and go to revolvers for primary carry. With this decision, one has to consider pro and cons. One con of the revolver is reloading speed. Like with any handgun owner, I have a pile of holsters. With that same due diligence, I now have a pile of speedloaders, strips, etc. I pretty much bought at least one of everything (except Speed Beez) looking for 'the one'. I made my own holder, which makes it easier to conceal and, with the Comp III, am able to reload my revolver almost as fast as I can my single stack 9mm pistols. Much faster than any of the other reloader vendors or methods I've tried to date. Because of the operation, you are much less dependent on gravity, making it easier to reload in unusual positions...gravity is still gravity. I do, however, also carry a strip for top offs. For competition...this style or moon clips are the only way to go.

I bought 2 of these for a K frame and neither will release the rounds into the cylinder. Maybe it's a bad batch. Maybe they need a break in period. Going back to HKS for the time being.

Seems to work as it should. Time will tell if it holds up. Only gave 3 star rating because the one I was sent was obviously one that had been previously returned and scotch taped back closed and was missing the instructions. I messed around with it and figured out myself how it worked though and it doesn't seem to be defective.

very good little speed loader. Just wish they was a little cheaper and that speed-loader pouches where more widely available. I am using these in IDPA SSR division. If you are planing on shooting IDPA SSR buy 3 of these and 1 hks speed loader. You will use the hks to load your gun at the start line and the COMP3's will be your speedloaders you use during your course of fire.

Hold it in one hand to load bullets, palm the bullets in the loader, and twist the top part down and to the right until it clicks,about a 1/4 inch. You are DOne! To load, simply press down into the cylinder holding the middle of the unit, and Click! DOne! Revolver lovers should grab a few..light weight but not at all flimsy; glad I got 4!

マルシンマテバ用に購入しました。 マルシンのカートを使うには最適です 38スペシャル、マテバ用357どちらもきっちり使えます ダミーカートは…使えない事はないけど、事実上使い物にならない感じ ダミーカートがリアルなサイズではない？というのは初めて知りました 使い心地ですが マルシンのカートを使うには最適でサクッと使えてオススメなのですが 全体的に樹脂の粘りを感じる操作感です マルイカート使ったマルイローダーには劣りますね まぁ、マルイカートもモーダーもマルシンを使えないので意味はないですが…

COMPⅡJ-K2Cが届きました、現在交換依頼中です19/4/22

They worked very well but unfortunately were not meant for the revolver i wanted

Used this for taking my black badge course. Worked flawlessly. I'll be purchasing 6 more.