ZXTDR 360mm 14 3/16" Rear Back Shock Absorbers Suspension for ATV Quad Buggy Go Kart

Mounts were too wide, had to grind a 1/2" off to fit, also had to use the old spring, which also had to be slightly modified to fit, but it did go on and it works, this was 3rd attempt at getting the right part and this was the closest fit, so I chose to make it work instead of going through more wrong parts

This shock fit fine on the back of my Honda 250 Recon. The shock is very hard to adjust preload. No wrench or instructions are included.

This shock did the trick! I restored a 95 fourtrax 200 to reliable condition. I chose this shock which is about 2” longer than stock so I could get a little more ground clearance. It’s a little to stiff on the lowest setting even but I think it’s meant for a little bigger atv. It’s a work around the farm atv so I am pleased with it. The white also adds a nice pop to the ol girl.

held up with 250lb with out bottoming out.

Waste of money. Completely disappointed

The shock seemed good but by the second trip out both bushings were bad.

fits perfect and has more spring than the stock one. put it in a coolster ATV3175S

It a bit shorter than i wished