White Knight 606-2 Aluminum 4 and 5-Lug Wheel Spacer, 5mm (Pack of 2)

Bought a set of 4 for my 2002 Honda Civic Si. Wheel stud pattern on my car is 4x100. This was exactly what I needed when when I bought a spare set of wheels and snow tires. The new steel wheels I bought didn't fit over my hubs. 5mm is the exact thickness to overcome this problem on my car but not stick out so far that it looks like Super Mario Cart. The fit of the spacers was OK. These are universal so I was not expecting an exact fit.Installed the wheels over the spacers, torqued the lug nuts and went for a spin in the city then out of town at speeds up to 80 mph. No weird vibrations, no noises and the steering wheel was steady.

Not very flat and had witness marks from molding, but dont care. Run 'er down with a hand full of ugga-duggas and she's good to go.

The 3mm thickness was just what I needed to prevent the tips of the axles from popping my wheel caps off. There was plenty of meat on the wheel lugs and the spacers fit perfectly and snug onto the hub. This was a non factory upgrade on a 2012 825I from steel wheels to alloy. See pictures below. Happy camper!

It does the job for the price. I would recommend using a more custom fit on your vehicle if you are not on a budget. These work fine but are universal so obviously they are not meant to stay snugly fit against the wheel hub. They are made of good quality material so I do appreciate that.

Perfect fit

Anyone buying these should know these are the cheapest type of wheel spacer on the market. And I really dont trust them. But I needed them to get me by for a bit, and for that they did work...Cast Aluminum, they dont have any way to center themselves.

Works as expected on my 2006 Toyota Prius with a 5 x 100 bolt pattern. Didn't really need to centre them as the pattern is designed for 5 x 100 (as well as other patterns). No vibrations at all. Good value!

Good product that got the job done

First off, they are not the same as in the picture, but that's not the worst thing. The material they use is very very cheap aluminum and can bend or dent if wheels are over torqued. The design is garbage as the surface has crevasses and not flat. I run 3 different sets for track use, and street use and would never EVER recommend this garbage product to anyone for safety reasons

These do not have a centering ring ( being universal) so I put a little grease on the back to try and hold them in place as close to center as possible while putting the wheels on. Pretty impossible to find a 'hub centric' spacer that is so then but i knew this when purchasing so no surprise.These are not solid aluminum, but relief cut on the backside, so they are kind of 'hollow' and extremely lighweight. Too bad none of the pictures showed this or I would have most likely purchased a better set.FOR THE MONEY, they did perfectly fine. My winter tires now clear the calipers.

First off, the spacer I got was absolutely nothing like what the description said or what the pictures looked like. And secondly it was awful quality. There’s barely any material at all and it has a ton of play, and they even cut out out a good majority of the metal that your wheel is supposed to sit on making minimal contact with the rest of your hub. I don’t think they would last anymore than a week on any vehicle before breaking and causing an accident. DO NOT waste your time and money on this garbage. I will be returning mine immediately.

I bought these and other pairs of spacers as an inexpensive way to determine the wheel offset I wanted. Afterwards I replaced them with a custom set made to my specific needs. They easily cleared my 5x114.3mm (5x4.5") bolt pattern. As these are made for multiple bolt patterns and have a rather large (about 78mm) inner diameter, they have a lot of play just resting on the hubs. Did a quick test drive with them not centred and had sufficient vibrations around highway speeds. I did my best to centre them by eye afterwards and any vibrations or imbalance was reduced below what I could feel.

It looks like the manufacturer has actually gone out of their way to make this as fragile and unsafe as possible. For no apparent reason, they’re removed completely unnecessary material.They are so thin in some areas, these will crush over time and cause loosening wheel nuts or bolts.