4 ft. Easy to Install No Digging Flexible and Sturdy Rubber Landscape Edging in Gray (6-Pack) Installation Hardware Included

This product was installed by 2 senior citizens. We allowed 3 days to install 3 sets of this border. We installed it in about 7 hours. It was really simple and went together great. I did the research on the product and my husband did lots of research on the install. The 2 things he found out were to use a drill for the holes for the connectors to make it easier to insert the connectors into the edging and a rubber mallet and screw driver to to open up the holes for the spikes. The edging material is high quality and well made. We looked at different brands at a big box hardware store and there was no comparison. The connectors in the other brand were about 4" long, flexible and would bend when trying to insert them into the edging. Also there is no comparison between the quality of the edging material to the other brand. We did have a problem with one of the boxes being broken in shipping and losing some pegs and connectors in the process but when we messaged them through Amazon they quickly replaced them. It cost more than we had planned to spend but was so well worth it. It looks great and has made it so my husband has less trimming to do when he mowed. If you take your time and do the prep work with the drill and screw driver I can't imagine you not being pleased with the result.

Heavy, durable, easy to install, foundation beds have a more finished look now and all the mulch will stay put. If it was less expensive I'd put it on all the beds, but for now just the front. No more weed killer between mulch and grass. Mowing will be easier along edge of beds too and no more sucking up and spitting out stray mulch that's migrated into the lawn. great product.

The edging is beautiful. The plastic pegs were not adequate. The first one seemed wonderful until the last hammer hit it and the top popped off. I ended up purchasing some rebar with a hook type end and a very sharp pointed end to hold it in place. I ordered 40 of them for a very reasonable price on Amazon. I painted them with Rustoleom rubbed oil outdoor spray paint to match the edging. The rebar will make sure if a tractor happens to run over it, that it stays in place. I ran a string and ended up using a 2x4 up against it to easily run a very straight line. The installation went fast. (I did not need to cut).The flower bed edges up between my lawn and driveway. I get several feet of snow and the tractor needs to stack it. I purchased this edging due to the fact that it should hold up to the tractor running over it, in case it happens. Metal edging will bend and most plastic edging is brittle in winter and will break, wood stick type may break as well. I did not want to use RR Ties or logs. This is my dream answer. Do it once, it should last my lifetime.After receiving the edging I am very confident that it will hold up to a tractor running over it. It does not sacrifice sturdiness for aesthetics. It looks very nice.

This EcoBorder lawn edging was just the right amount for my small landscaping project. The edging itself is well made, flexible, and looks clean and professional once installed. I really like that it’s made from recycled rubber — durable and eco-friendly.The only downside is the stakes, they can break if you tap them in too hard, especially in tougher soil. I’d recommend taking your time with installation and maybe pre-loosening the ground a bit.Overall, a solid product that does the job well!

I really like the look of this edging when it's installed, and expect it to be durable. Fairly easy to install, but there are a couple of things to keep in mind if you elect to use this:1) It's easy to install (even for a 70 year old like me), but looks a lot better and has fewer joint gaps if you level the ground.2) Be sure you have some 3/16" dowel stock on hand...the plastic pins used to join the sections break easily, and there are no extra pins provided. You can cut the dowel to 2 & 7/8" to make a replacement pin.3) You may encounter sections where you need to drill the joining pin hole a little deeper; easy to do with an 11/64 drill bit set to drill in about 1 & 3/4" deep.4) If a joining pin has broken, use a pair of needle nose pliers to pull the broken pin....I had two break so far and they are a pain to pull out without needle nose pliers5) As other reviews have stated, make sure you purchase some extra spikes...these also break easily when installing. I bought metal spikes for replacements and also to add to curves and joints where extra holding was needed.6) If you have to use a hammer, do it gently. When driving the spikes, I recommend using a block of wood on the spike head rather than hitting the spike directly with the hammer....it'll save you several broken plastic spikes.It takes my wife and me around an hour to an hour and a half to install 6 of the 4 ft. sections. (We're doing around 180 feet of border.) The only digging needed was to remove small sections of grass and to level places where needed. We put all 6 sections together in the place we would install them WITHOUT spiking the sections and were then able to tell where leveling was required. Once the levelling was completed, we installed the spikes.I recommend this product.

Easy to use and looks great

If you were looking for an alternative to high priced long edging this is definitely one to look at. The project I had did not need to be cut so I can’t talk about that. It is high enough that mulch stays put except if you have a downpour or wind. I bought the brown and I really do like it. These steaks were easy to insert. I plan to purchase more.

Easy to install works great to contain mulch/ dirt. I installed it backwards along sidewalk to keep mulch from washing out with heavy rain. Works great. Plan to buy more for garden edging. Highly recommend.