The Winters PEM series pressure gauge with brass wetted parts has a circular dial enclosed in a steel case and a male connection, and measures pressure with a dual scale (psi/kPa)/(Hg. vacuum/kPa) with an accuracy of + or - 3/2/3%. The brass wetted parts are for measuring non-corrosive liquid and gas pressure. The black-painted steel case is Ingress Protection certified IP52 for protection against dust or liquids. The circular dial comes in 1.5" (40 mm), 2" (50 mm), 2.5" (63 mm), and 4" (100 mm) diameters. The dial has an aluminum black pointer. The lens for the 1.5", 2", and 2.5"diameter dials is polycarbonate for high impact resistance. The lens for the 4" diameter dial is glass for strength and clarity. The gauge measures pressure with a dual scale of either psi/kPa or Hg. vacuum/kPa. The gauge is accurate to + or - 3/2/3% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade B accuracy class. The male connection is mounted on the bottom or center back of the gauge and has either a 1/4" NPT (National Pipe Thread) or 1/2" NPT rate. The bourdon tube is phosphor bronze, the movement is brass, and the welding is silver alloy. The over-pressure limit is 25% of full scale value. The working pressure is a maximum of 75% of full scale value. The operating temperature is -40 to 150 degrees F (-40 to 65 degrees C). This pressure gauge is suitable for plumbing, heating, air conditioning, pneumatic, hydraulic, water tanks, and air compressors. Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing.
R**P
Works fine
I use it on a separator/regulator for adjusting airbrush air pressure. Since about 30 PSI is close to the pressure limits on an airbrush, and I'm most interested in 10-20 PSI, it's perfect. It's far easier to go back to say 22 PSI (marked on the gauge) when it's 2/3rds of full-scale than less than 1/4th of full-scale.
T**Y
Super nice guage!
I just needed a cheap gauge to replace a damaged one on a regulator.But I was very surprised at what a nice well made high quality gauge this was!It has a nice clean easy dial and it measured dead on.The best $8 I have spent this year!No reason to pay more at all.
F**0
and it works great, telling me when I need to backwash the ...
I replaced the broken gauge on my pool filter with this, and it works great, telling me when I need to backwash the filter based on an increase in pressure. Its not expensive though, so tightening it on requires a careful twist of a wrench on the base just after the threads. If you twist on the gauge it feels like it will break.
A**R
Replaced broken gauge on my pool filter with this. ...
Replaced broken gauge on my pool filter with this. Worked until the end of the pool season (SEP '16), but now (first day to run pump this year, MAR '17) reads 15 PSI when pump is off.
J**B
Solid construction, timely delivery
I needed the low end scale (0-30) that this gauge provided. Fit easily into my existing gear. Passed the pressure test inspection today with no issues.
G**B
but it gives me a good enough idea
Using this as part of a spunding valve. Not sure about the accuracy as I've never checked it, but it gives me a good enough idea.
O**T
Right part, works well!
Used this item in building a forge. It works great and allows me to get a better idea about how much propane works best. Would recommend! :-)
K**.
Works Great!
I use this in a system that normally runs about 15PSI. The traditional 60-100PSI gauge simply doesn't afford the resolution in my application as does this 30PSI gauge.
Trustpilot
2 days ago
3 weeks ago
