Water Clear Casting Polyester Resin kit | carbonblack composites | 500grams

Easy to useKeep away from kidsI made paper weight for trial, with the help of empty plastic container of jelly beanIt means It works fine with any plastic ... no need of mouldIn my photos I used natural real red roses, which turned white but gave unique look to my projectNext I am going to do photo fridge magnet 🧲Recommend to buy

First of all, the product package don;t have the information on dates... so if you received it, you don;t know how old it is and how much life available for you for this product. Shelf life is low and I happened to receive the product which turned to jelly before I can use it...I saw bottle started squeezing but in 1 and half months and didn't knew that it's turning to jelly.. And just about 3 months, the entire product was turned to jelly. I checked with company and they didn't replace it...Bad support from the company.,,,

Product is may be good but I tried first time and my experience was horrible... Very strong smell ... I mix all material together And measurements shuld be not right manner that's why all rasin become a rock with very harsh smell.. bad experience for me because may be i prepare with wonrg quantity..

Good product. Water clear. Started hardening after 30 mins at 12 deg room temperature and settled after 8 hrs with 10ml/4drops mix. Except price rests are good. Long back we used this material for prototyping behavior of beams under various load conditions in engg studies.

Good product. Water clear. Started hardening after 30 mins at 12 deg room temperature and settled after 8 hrs with 10ml/4drops mix. Except price rests are good. Long back we used this material for prototyping behavior of beams under various load conditions in engg studies.

I did not like the resin at all. firstly this is a polyester resin and mix ration is 100:1 which is very difficult to maintain if you are pouring small amount.Pros :- Crystal Clear and almost no bubbles at all.Cons :- You have max of 5-6 minutes of working time which is not enough for art and craftit smells of chemical.it heats up very badly.it does feel solid to touch in about 3-4 hours but even after 72 hours the cast is very very sticky. So i had to throw out all the casts made with this.Not recommended for art and craft.

Very easy to use.. And talk to nice person Prasad ji owner of this product.... From Agartala

I am new to resin jwellery and now after using this product I can say don't ever go for polyester resin.I was not knowing much about epoxy but after my failure with this resin I learned that epoxy is the best. ( its price is double to polyester though )Coming to my experienceI received resin and catalyst in cardboard box at my building gate. Watchman suspiciously handed over me the parcel and soon I found that the smell was horrible.I have kids at home so kept the bottle in separate room. Believe me every time I enter the room I felt like inhaling toxin.I soon realized I have to use up this thing or throw.So one night after my kids fell asleep I started to work.I observed the resin and it was too thick to handle ( compared to the ones in those you tube videos )I managed to take it out and added measured amount of catalyst as per suppliers guidance.I used hardly 30 ml as I needed to make some pendants and free forms.I settled my pieces to cure. And after 2 days they were cured but reminded tacky on surface. I kept those in sun. Results bit improved but they again became sticky.After few days (before 3 months of purchse ) I tried to use and guess what the whole stuff is hardened in bottle itself.Finally its worst product I purchased from amazon.Few tips1. Use up all resin at once.2. Be ready for horrible smell in your house.3. Don't forget to wear mask while working.4. Don't go for too thin application as product is too brittle.5. Expiry is very short so use up accordingly.I will next time never use polyester.Will try epoxy and keep my fingers crossed.