Tool Daily Foam Cannon with 1/4 Inch Quick Connector, 1 Liter, 5 Pressure Washer Nozzle Tips

Solid foam cannon. I have been using it weekly since getting it to wash vehicles. Works great and makes good foam. I have not tried using the pressure washing tips yet as I have ones that I am still using. Great to have extras. This is a good value

I noticed that most reviews here are just for the power washer nozzles. As most know, Amazon often mixes product reviews. I ordered the foam cannon and the nozzles came as a bonus. BTW, they are the same quality as the nozzles that came with my pressure washer. It' almost seems like they all are the same as if they are made by the same manufacturer. They're high quality. I see someone mentioned that they wear out. I can't imagine how power washer nozzles can wear out and I've been using the ones that came with my pressure washer for years with absolutely no problems. Brass and aluminum is not worn out by soapy water or plain water. The only thing I can think of is that person was experiencing a buildup of minerals from hard water. If that's the case, that's easily cleaned out using LimeAway or any similar product or even just vinegar. Anyway, enough of that. It's the foam cannon that I ordered this combination for. I put a few tablespoons of Chemical Guys CWS_110 Honeydew Snow Foam in the jar and filled it about 2/3rds the way with water. I turned it on and holy smoke! The thickest foam covered everything I tried it on. It was like icing a cake. Beautiful thick foam! I immediately thought that this is one tool that I'm going to wonder how I ever got along without in the past. This is going to be great not just for my truck, SUV and motorcyle, but also for windows, etc. When testing it, I used it on our big gas grill. It worked beautifully. Before ordering this, I read many reviews as I always do when buying something. Like the nozzles, I can't figure how the foam cannon didn't work for some people. The only thing I can think of in this case is they used the wrong foaming product or they didn't adjust it right. When I first turned it on, the blast was very strong and narrow. It really blasted the foam on in a tight stream but it spread out easily and quickly. Then a turn of the adjustment and I could get anything from a wide, gentle fan of foam to the concentrated, narrow blast. The way these work is very simple and basic. It just applies the venturi principle. There's very little that can go wrong with the cannon itself. BTW, you can tell this foam cannon is high-quality when you pick it up. Other than the jar, it's almost all solid brass. I doubt if there's any practical difference between this and higher priced foam cannons. In fact, I'd be suprised if they all aren't virtually identical for all practical purposes so why spend more. The old adage that you get what you pay for is nonsense. If it was true, there would be no reason to shop around and compare prices. That rusty old adage would mean that you would get a better car if you paid more at one dealership for the same exact car than you paid at another dealership. Nonsense! An example from last week: I'm changing the transfer case oil in my truck. Most dealers online charge $49.95 to $59.99 per quart!!!! I went to the most popular online auto parts store and I got the same exact stuff for $5.35 per quart. My point is, just because someone else charges more for a foam cannon doesn't mean it's better. This one is a great value, especially considering I now have a spare set of nozzles for my power washer. Just buy it!

Great as a starting kit if you're on a budget. Our vehicles are accumulating more dust, dirt, grime, and sludge everywhere we go. So, to get things done quickly, we got this foam cannon with the setup: Westinghouse e3200 pressure washer (~1.1 GPM @ 2800 PSI), already have it in the garage 1.1 mm nozzle upgrade over this measured 1.5 mm nozzle for $6. A short sprayer gun with disconnector for $20. Chemical Guys Honeydew ($30) to compare with the Costco Turtle Wash & Wax ($17) I followed the video instructions for the maximum amount of foam generation for the longest resident time. I filled the 1-liter foam cannon bottle with 900 mL of water and 100 mL of car wash & wax. I even tried the 800 mL of water and 200 mL car wash & wax soap. Using the original ~1.5 mm orifice, the resident time doesn't stay on the body more than 3 minutes, even with all the proper settings. Once the 1.1 mm orifice is installed, the resident time is boosted past 10 minutes with ease in the shade, or until the soap starts to dry out through evaporation in the partial sun. Wash your car in the shade whenever you can. The ~1.5 mm orifice is definitely for the much higher GPM gas pressure washers. Anything less than 1.2 GPM, get the orifice upgrade to 1.1 mm or even 1.0 mm. Just a warning, if you're trying to get as much of the car covered as possible with the thickest foam layer, you'd better be ready to use two refills of 100 ml to 125 ml washing soap. It doesn't matter if you're using Chemical Guys or the Turtle Wash & Wax, the foaming resident time and cleaning power are exactly the same. Save yourself some cash and get the cheaper one. Do follow the Chemical Guys' instructions for using a two-5-gal bucket system: one for physical contact and one for rinsing the washing mitt/applicator to prevent scratches. No matter what soap you purchase or how much you spray with the foam cannon, you will need to do a full touch to get the road grime off your vehicle. There's no if, and, or but about it. Just a warning. Once you have finished applying the foam, use the foam cannon as a pre-rinse sprayer to remove as much soap and wax from the foam making mesh as possible, running it for a minute or two until the water runs nice and clear. If you don't, it will get clogged in future usage. If it does happen to clog up, open up the foam maker mesh and let it sit in the 70% alcohol for 5 minutes. It will have no issue in spraying foam again. The great thing about this is the pairing of available nozzles, a foam cannon, an orifice upgrade, and a cheap short spray gun, which will set you back less than most setups out there for your pressure washer. If you're worried about it getting damaged easily, I dropped it at least a dozen times with the bottle fully filled. Lots of scuffle marks, but still works like it's brand new. I also noticed that the bottle could be replaced with one of the larger shampoo bottles I have lying around the house. I upgraded the bottle to a 3-liter bulk version, but that was pretty heavy. I'll stick with this 1-liter bottle and keep the 3 liters for emergency use if the bottle cracks.

I’ve used this foam cannon for washing my car and for cleaning large toter trash cans, and it has worked really well for both It’s easy to connect to my pressure washer and the adjustable foam and spray pattern make it easy to control how much soap and coverage I want. The bottle holds plenty of solution and it produces a thick foam when adjusted properly. I’m really happy with how versatile it is. I originally got it for car washing, but it has been especially useful for cleaning my large outdoor trash cans too and I’m planning to use it for cleaning my son’s outdoor toys. It’s been a great addition to my pressure-washing setup and has made cleaning larger and dirtier items much easier. I have experienced no leaks and it gets a great seal.

This foam cannon worked out great and completely exceeded my expectations. The foam coverage was awesome . It didn't instantly run off like my previous cannon. If you want that satisfying, heavy snow foam look that makes washing your car way easier this is it.

Very impressed with this foam cannon, especially for the price. It lays down a really thick layer of foam and actually performs better than some much more expensive foam cannons I’ve used. Easy to adjust, connects quickly to the pressure washer, and the included nozzle tips are a nice bonus. Excellent value.

Amazing tool to make foam to clean my side by side, easy installation fits perfectly in to my pressure washer, no leaks and very sturdy product, amazing tool works great and helps me a lot.

This foam cannon is decent for the price, but it definitely has some limitations. The 1/4-inch quick-connect fitting makes it easy to hook up to a compatible pressure washer, and the overall construction feels reasonably sturdy. The adjustable nozzle and soap mixture control are useful for dialing in the amount of foam and water being applied. My biggest disappointment is the foam coverage. Even with the soap concentration adjusted and the pressure washer running properly, the foam doesn’t spread as evenly or cover as thoroughly as I expected. In some areas it produces a decent layer of foam, while other areas are noticeably thinner. If you’re looking for that thick, consistent blanket of foam that you see with higher-end foam cannons, this one may leave you wanting more. The water flow is adequate, and it does get the job done for basic washing, but it takes some adjustment to find the right soap-to-water ratio. The build quality is acceptable, although I wouldn’t consider it particularly heavy-duty or professional-grade. Overall, it’s a functional foam cannon that works, but the inconsistent foam coverage keeps it from being a higher-rated product. Three stars feels fair: usable and reasonably convenient, but there are better options available if thick, uniform foam is your main priority.

Great produckt

Why I didn't purchase one of these years ago. It works amazingly definitely a must have.

高圧洗浄機のガンに取り付け使用。 良いです。

Buen precio

Very happy. Good quality and awesome value.