Frizzlife Under Sink Water Filter-NSF/ANSI 53&42 Certified Drinking Water Filtration System-0.5 Micron Removes Lead, Chlorine,Bad Taste & Odor, W/Dedicated Faucet

My family and I have been dependant on water bottles for years. I kept my 4 legged son (German Shepherd Dog) on bottled water until it wasn't financially feasible anymore. Switched him to tap water 2 years and back and it's been one problem after the other, hence my decision to finally invest in a water purifier. Initially this product was intended to cater him. End result? My entire family is going bottle free! The water tastes 100% different and just like bottled, if not better. It's unfortunate I didn't make the change sooner. Installation was straight forward and everything fit perfectly. The additional of a blade and pumbing tape ensured I only brought a drill, screwdriver and wrench to the table. Directions were clear, albeit the small workspace under my sink did make things difficult. That's more of a personal issue given my larger build. I emailed customer support with my order ID and request a 150% extension on warranty. They were very thankful for the purchase and extended warranty to 3 years. I further inquired about filter replacement and they responded in under 10 minutes. Apparently, it's 6 months to 2 years. Entirely dependant on quality of water (municipal/well/etc.) and quantity used. (obvious). Due to living in Southern California and having it connected the municipal line, we will adopt a 6 month schedule. Overall: Absolutely satisfied! Give it a shot. Huge bang for the buck, but do dedicate some time while installing it. I didn't have leaks, first try.

Frizzlife Part Number MP99 Believe it or not, I went through four (4) different below $100 undersink filters. NEVER by a GE-branded filter in this class. They are poorly designed, will eventually leak, and are unforgiving wen installing. I know because when my ld GE filter failed, I ordered an new GE filter and it was crap. I am not a rookie at home plumbing or water filter installation. The Frizzlife filter reviewed hear (undersink with separate faucet) was a breeze to install and can be easily disassembled if after installation you want to change or clean up the routing of the pipes or the placement of the filter body. NOTE: If you have an older home that has a supply line that ends in the common 1/2" copper pipe threads, you will need an adapter because this system attaches to what are called '3/8" compression threads' (despite the fact that the connection is not a compression connection). This is common these days. Search for "Frizzlife Brass NPT Thread Pipe Fitting Converter - 1/2 to 3/8 inch" on Amazon if you need the adapter. You can also buy an adapter suitable for potable water at Lowes or Home Depot, but you have to know walking in exactly what you need. Either way, an adapter will cost you between $6 and $8 extra. This filter kit cam e well packaged, and all of the components appear to be quality components. One handy feature is that they supply a valve in the line going to the faucet for the filtered water. If for some reason you want to remove the filer or have a leak down that branch, you can just close the valve. All of the plastic hoses are retained by clips. If you remove those clips, you can take the hose out of the coupling and shorten or reroute it. The faucet itself is nicely made, looks good and functions well. We like having the separate faucet because our water quality is good enough that we only need filtered water for cooking and consumption. If I am washing my hand for ten minutes after doing auto repair, I don't need to use up the filter life for that. Filters are expensive, especially for some companies, but Frizzlife filter are less expensive and last a long time. So, this water filter update in my kitchen sink was something of an ordeal. If I had ordered the Frizzlife filter the first time, it would have been a piece of cake. I'm just a homeowner with no connections or affiliations with any company. I am simply very pleased with this product after searching for hours to choose the best option and going through two duds before finally receiving this Frizzlife undersink unit.

I received this water filter a few days back. Nice packing. I have to say that I’m not a handyman, at first I have no clue how to connect. The instruction manual is very easy to read, but just in case of the wrong installation, I got it installed also with the help of a video that I found on YOUTUBE, turns out to be pretty easy. Nice valve, seems quite strong, so far no leaks which is great for my first experience on installation. I didn’t use the screws to attach the filter bracket to my sink plate, just put it there under the sink, I wouldn’t suggest you to mount with screws as well especially if you have a decent sink wooden plate. I think the hardest part for me on the installation as my sink doesn’t have the hole, so I would have to drill a hole for the faucet, by the way, the faucet looks just great, I love it. The manufacturer suggests to flush the water filter for 5 minutes, it’s way to long time for me, so I just flushed about 1-2 minutes, no black water compare to other brands that I used before from my last apartment which is pretty nice. The greatest thing for me is the water! The flow is quite large, and the taste IS JUST BRILLIANT!!! Highly Recommend!!!

Loving the convenience of this water filter so far. It's so nice to not have to refill a Brita filter anymore. I chose this filter because I wanted an under the sink filter with a designated water faucet to preserve the longevity/lifespan of the filter and also because I wanted one that was NSF/ANSI 53 certified for health effects - something particularly hard to find in this price range for under-sink filters. Water tastes OK - not bad at all, but also not delicious like I find Sparkletts to taste. Installation was rather easy, though one trouble I had is that I'm renting and the kitchen sink had a pre-drilled hole in the fake-quartz countertop which was marginally too large for this faucet. The faucet could fit entirely through. Luckily, the rubber gasket was just a hair larger than the hole, so I was still able to install it, but if I tighten the faucet over the gasket too securely, it caves into the hole, so the faucet is rather loosely affixed to my counter and rotates with the slightest force when turned on/off. Wish there was a larger metal gasket they provided to help with this issue since I can't drill another hole in my rental's kitchen countertop. Update: Been using for 2.5 years and filter has been working great, as advertised. My one challenge has been with replacing the filter. The plastic compartment that the filter is inside of is nearly impossible to open, even with excessive force (neither me or my boyfriend could open it). Took us over 30 minutes of huffing and puffing to open it with rubber bands to give extra grip. We broke the plastic "key" that came with it because the force required was so great to open it. Have to reach out for a replacement key now for the next filter replacements down the line.... wish it was easier to open, but luckily we don't have to replace it often.

I am writing this review without any incentive but to say this product worked for me! I bought this faucet along with the MSTJRY faucet, partly bc the design of the two faucets looked similar and the metal finishes looked similar. I am happy with both. I had trouble installing but it wasn't due to either of the faucets. My 20-yo valve under the sink was leaking when I tried to turn off the water, and... the old faucet was impossible to remove! I ended up spending all day fixing the valve and then had to dremel off the old faucet! But putting on the two faucets was actually a piece of cake. For the Frizzlife faucet, it really helps to watch the install video. Even so I still messed up when putting the little blue clip into the connector... note that it only goes in ONE WAY, not upside down... and, to remove you need to push down on the connector end... just watch the video. I saw the video but forgot about these fine points... and... ended up destroying the connector!!!!!!!!!!!!! THANK GOODNESS they put in TWO connectors bc I needed two! The faucet itself is nice looking enough (see pics). I'm really liking it. The filter came pre-installed but I took it apart with the wrench to see for myself how difficult it was to take out... it does take a little bit of force... I had to clamp the container between my legs and used the wrench to turn the filter. The water flow is much stronger than what I was used to with the PUR add-on. And, the water tastes GREAT! LIKE IT. Big shoutout to AMZN for delivering my order free next day via Prime. I ordered the parts on Sat, and started working on yanking the old faucet on Sunday and working on the broken valve, and later in the day, the faucets arrived and I installed them without too much trouble.

So far it has been pretty good. About the same or better than the the Pur faucet attached filter it was replacing. Water tastes very clean and good pressure. I do also have 2 ten inch whole house filters sitting at the front of my supply- sediment and carbon block (both 5 micron). This one says it is half a micron. Installation was pretty straight forward even though I hate doing plumbing. For some reason my kit came with double the fittings and hardware and two of the filter wrenches. *shrugs* I like the little tube connector fittings. They are like tiny sharkbite fittings. And they work just as well. No leaks thus far even though i was in a hurry getting it installed. As stated by others, the included faucet is a little on the wobbly side, but no too terrible. I can be easily rotated out of the way so you don't bang pots and pans off if it. I looked up alternative faucets and they are pretty pricey and didn't really look like they offered anything better. So I will stick with this one. I will say the one thing that made me choose this one was the fact that you replaced the inner filter, not the entire cartridge like others. This allows the replacement filters to cost much less. Overall, I would recommend this product, especially at this price point. Their website is also useful if you want info, support, or buy replacement parts (out of Colorado). Finally, I know a lot of people like to complain that this product isn't NSF/ANSI/42/53 certified. However, it IS independently tested by IAPMO R&T against those standards who happened to be accredited by...you guessed it.. American National Standards Institute (ANSI). So you are safe people, you are safe.

Easy install. No leaks. Should go in without trouble if you follow instructions and do it carefully. Water flow is very good.

Overall, my situation is very different than a "new" house with no existing under-cabinet water filter. The house we live in now was upgraded with our undercounter water Amway filter which today is over 20 years old and everyone in the house was sick of the poor filtering quality. Since Amway stopped selling replacement filters I could only find after-market filters which were not the same quality plus I suspected all the crud on the water spigot and I'm sure the lines were also not so clean any more. So, after enough online analysis and "consumer reporting" (who did not impress me with their recommendation) my wife and I decided on the Frizzlife water filter. Several changes were going to happen because my wife was concerned with the dishwasher in the cabinet adjacent to the sink in that it heated the sink cabinet. This was a problem as she continually noticed "warm" water from the existing filtered water spigot. The heat affected the Amway filter and all the tubing under the sink. In addition, I had run a line from the sink cabinet down to the basement to feed the ice maker. All of which was done with 3/8" tubing instead of the standard 1/4" tubing. So, as I said, my situation is not the "new" house situation and took more work than most would dare to sign up for. So, our installation required the filter to be placed in the basement, far away from the dishwasher's heat. This is why you see it mounted in the basement where it will stay cool. The blue line represents my cold water feed from under the sink and the white line ( I purchased the ice maker kit which is white tubing - I tend to sometimes over design ) is the filtered line. I split the filtered line coming out of the filter with a T-connector then placed a separate shutoff for the ice maker (in case I need to 1) adjust the pressure going to the ice maker and 2) I need to move the fridge but I don't want to shut off the filtered water all together - again, my insane over design mind at work again ). I also had to change the fitting on the 1/2" copper to a Sharkbite 1/4-turn 3/8" compression as the existing fitting was a dual 3/8" with the 1/2" sweat copper fitting. With the Frizzlife 3/8-3/8 thru with a T-1/4" shutoff adapter which screwed right onto the Sharkbite 3/8" compression threads I had no problem. All of the tubing snapped into the fittings clean and without trouble. I made sure EVERY tube was cut at 90 deg to ensure the tube would seal when inserted into the fitting. As for the faucet, my old faucet was disgusting! I crawled under the sink, as someone else said, doing a contortionist maneuver - not once, but several times. Removing the old faucet required my daughter's help to turn the faucet while I held the nut from underneath, all the while pieces of dried plumbing putty falling on my head, face, nose, mouth (yuck!) and my daughter screeching how disgusting it looked from her above-sink vantage point. Then, installing the new Frizzlife faucet took the about the same effort except tightening from underneath instead of from above - this took me much more effort with a sink-wrench. Overall, the work involved is typical of a sink faucet installation and the extra work in the basement is far above expectations for most, but again, my situation was very unique and my wife had very specific requirements going into this project. The Results: My wife noticed the lower water pressure at the faucet, which I had warned her would happen since I was changing from 3/8" tubing to 1/4" tubing but she LOVES the clarity and taste of the water. My favorite result is that following the guidelines and instructions I had ZERO (0), yes, you read that right, zero water leaks when I restored the water! I was somewhat concerned about leaks because of other reviews but then I realized they may have not made clean, 90 deg cuts. Plus, I've done enough plumbing work to know that taking the time to make the correct cuts, properly cleaning surfaces (like the 1/2" copper before inserting the sharkbite) and double-checking all insertions is extremely valuable. Keep in mind I too have a history of making huge messes with water leaks. I have had a history of the ice maker line leaking at the most inconvenient time (a la Christmas morning while we were at Grammy and Pappy's house and the basement started filling with water while opening presents). Lastly, the process to change the water filter at regular intervals was a MAJOR concern/requirement on my list as I have had to change the old water filter every 12 months for over 20 years and I was SICK of cleaning out the sink cabinet and then going through the exercise of turning off the filter water, opening the filter (creating a minor, wet mess) and cleaning out the filter housing, then installing the new filter and then running the water for 5-10 minutes to clear the filter of carbon particles after which I reloaded all the cabinet items. Now, I have all the room I need in the basement to work with this filter AND I do not need to worry about any "minor" water messes as it auto-shuts off when replacing the filter. The bonus is I was able to hang the plastic wrench on the same mounting board as I mounted the filter. For some odd reason I actually look forward to replacing the Frizzlife filter! Overall, all the items are solid quality and if anything, Frizzlife goes above and beyond. From the complete set of instructions to the attention to detail with parts and how the parts are purposely packaged, everything they shipped was in great condition and worked like a champ. I even sent in my 150% warranty information and they responded via email on a Sunday!

Perfecto cumple perfectamente con su función

Conforme et facile a installer

Buon prodotto, io sono un idraulico di professione, e vi assicuro che l'installazione è semplice, inoltre se installato nel modo corretto non presenta alcuna perdita! Sulla qualità dell'acqua mi fido della certificazione di cui dispone l'articolo. Per verificarla sarebbe necessario essere eseguire esami di laboratorio, impossibile da dire solo assaggiando l'acqua!

The day I received this filter I started wondering why I waited so long to install one. The overall TCO is about the same as my previous pitcher which was amongst the lower-end priced pitcher filters certified for lead reduction (just like this one). This filter came with the faucet and all hardware needed for installation besides standard tools (a drill and wrench), and that even includes a valve on the T adapter so you can shut the filter independently from the normal faucet. The filter cartridge can be taken off without shutting off the water inlet (a towel is needed as there's always a bit of water going out when removing the filter) and a bypass allow using the faucet with the cartridge removed (water obviously won't be filtered while in bypass). Water taste good and this solution is much more convenient than a pitcher. The flow is stronger than I would've expected and within a month I've already saved more time I'd spend filling up my pitcher than it took me installing the faucet! Definitely a great buy if you're not scared of drilling your sink or countertop. Besides the T adapter which is a simple screw-on adapter the piping is very simple to cut and connect.

Es costoso a comparación de otras marcas que venden en México, sin embargo la calidad en los componentes, la facilidad de cambiar los filtros, la durabilidad del mismo, el filtrado y sabor de agua, hacen que valga la pena . Su instalación en realidad no fue tan sencilla ya que tengo 2 cajones de “push to open” debajo de la tarja y el espacio es muy reducido, tal que tuve que quitar el bracket y agregar un cintillo metálico para fijar el filtro. Solamente por ese detalle fue que me tardé mucho pero en realidad te puede tomar solamente 15 min. La llave se puso en un agujero existente que tenía un dispensador de jabón de manos, por lo que no tuvimos que perforar el cuarzo. Recomendado. 👍🏻