The ULTRA Extreme Thermal Pad is a ready to use high end thermal pad. These are custom cut to a smaller, more applicable size. This line of thermal pads are much more effective than stock pads. With a 17.0 watt/mk thermal conductivity these pads will pull heat away from your important components with ease and allow for overclocking as well! These pads can be used for a wide variety of applications including laptops, gaming consoles, voltage regulators, memory ICs and much more.Both sides have a protective plastic that can be peeled once ready to apply. Features Premium Quality Easy to Use Above Standard Thermal Conductivity Easily Cut / Altered for All Applications Specifications Size:60mm x 50mm x 0.5 Adhesive:None Thickness:0.5^±0.1 mm Thermal Resistance:0.21 °Cin^2/W Color:Light Gray Thermal Conductivity:17.0watt/mk Volume Resistivity:1.0 x 10^5 M Ohm(m) Withstand Voltage:15kV/mm(AC) Specific Gravity:3.2gr/cm^3 Hardness:80 Shore 00 Elongation:35% Included Parts 1x 60 x 50 x 0.5 Thermal Pad Warnings PrimoChill is not responsible for any hardware damage. Use at your own risk.
R**E
Highest Quality Thermal Pads (NOT THERMAL TAPE)
Been using Fujipoly pads for years and they are excellent. The pads used in assembly are trash and in almost every case the thermal transfer is poor. I have used these pads in multiple application on several custom builds, GPU heatsinks and misc. heatsinks. The most notable application was an Alienware R4 17 1070 that suffered from severe thermal throttling. Upon tear down the pads did not make contact in several areas. Used a combination of sizes and non-conductive thermal paste to make sure everything had proper contact and the GPU went from hitting 90°C to maxing out about 70°C. Used Thermal Grizzly Kryonaut as paste. You can not go wrong with this product. Just make sure you dont mess up your hardware.
P**.
King of Thermal Pads
If you're looking for the absolute best thermal pads for your laptop or GPU, this is it. This pad is slightly harder to work with compared to traditional thermal pads as this one is stiff and brittle (it can break apart quite easily). However, if you apply these with care, they will be the best thermal pads you ever use. These have helped me consistently get my highest Firestrike and Time Spy scores out of a multitude of laptops from the GS65 Stealth to the Alienware m15 R2. TG Conductonaut is my go-to TIM and I've used it in conjunction with pads from Arctic, TG, and Fujipoly but these ones always give that little extra bit to get me the highest scores and more stable overclocks.
P**.
Priced in the Rockstar category.
This is my problem with this product. This is packaged in a way that if you buy it one that is 60x50x0.5 you have exactly enough to do 1/2 a good GPU Radeon or most Nivida cards. You will also need some that is 1.0 mm thick. It will cost you $36. Plus your time to upgrade to this product. I previously used the 11 W/m-k and was satisfied with the performance. When you're looking for the best scores and performance the best material is a step along the way. So if money is no object put this on with your new EK GPU 2080 Ti super waterblock. And if you don't overclock it and you want to sell it cheap 3 years from now hit me up.
M**N
Good stuff but be careful because somebody swapped this pad ...
Good stuff but be careful because somebody swapped this pad and replaced it with one of those cheap arctic ones.
M**T
Best Thermal Pad For GPU Memory
I've been trying for months to cool down my AMD RX5700XT graphics cards to no avail. The memory runs very hot and was reading 80C-85C junction/hotspot. As many miners know, this is "normal". I replaced the stock thermal pads using this product and immediately saw an improvement of 3C-6C on every card. I sleep better at night knowing that my rigs are running as cool as possible and was even able to lower fan speeds. I highly recommend Fujipoly Ultra Extreme pads. they are pricey, but you most certainly get what you pay for.
B**R
I'm the one that's all hot now
The ones in the know, which is you the reader of this review, love this stuff. Fujipoly Sarcon is the mythical 17W/mK stuff that's incredibly fragile yet somehow pulls heat off of hot mosfets and chips like no other thermal pad/putty out there. It's not conductive, stays put, doesn't dry out, it's the trifecta. It doesn't have the properties of the Panasonic soft PGS where it spreads out the heat, this stuff fills in gaps and transfers heat away. When you need that little extra bit of headroom because of a heat issue, this is what you need.Unfortunately for me, the majority of my latest dose vanished when I opened the package. To be honest, I'm not even sure what little i received is the high end Sarcon mix, though it does feel like Fujipoly stuff. Buyer beware. It might be better to source this from elsewhere instead of through a re-packager, though admittedly that can be rather difficult to do.3 Stars because Amazon made everything right and refunded my purchase right away.
T**U
Perfect and much better than the Blue stuff.
I love this stuff, it works so much better than some Blue alternatives. I went from overheating to cool as a cucumber.
R**T
The Best
Best thermal pads that money can buy.If you a PC gaming/modding enthusiast and you want the best performance possible out of your graphics cards, then these are what you want cooling the VRMs on your GPUs. Compared to what most waterblock manufacturers supply you with, you can see 20% reduction in VRM temps to assist in squeezing a littler more out of your hardware.Just make sure you buy the correct thickness pad as they come in 0.5mm, 1.0mm, and 1.5mm
Trustpilot
2 months ago
4 days ago
