Alla Lighting Xtreme Super Bright 12V DRL 5200lm AL-R H8 H11 6K Xenon LED Fog Light Bulbs , White.

Got this product and installed in my car. I am not happy to buy this as the product is expensive and not as per spec. I will not recommend the product for buy in future.

These are the second pair I've ordered. I replaced old halogen fog lights on one car and they were were super bright so I got a pair for my new car that had halogen fog lights. Best upgrade cheap upgrade I did and really helps with night driving

Love the light color looks very very niceThe fitment is excellent clips right in no struggle I have a 2014 accord

Installed the Alla LED fog light bulbs on a 2005 Porsche Boxster S Model 987. I replaced the factory original front fog light bulbs with Alla Lighting 5200 lumen (2600 per bulb) AL-R H8 Extreme Super Bright 6K color, xenon white. There were no code errors on dash display, so I did not need load resistors. Much brighter and color is more blue than the stock bulbs. They look great. Installation was finicky due to Porsche design and the fact that the Alla lamp base is larger than the original. To install: Remove two screws under plastic light fixture, then fiddle with fixture until it pops out of bumper. Remove electrical plug from old bulb (squeeze both tabs simultaneously, then pull plug.) Twist and remove old bulb. If the old red rubber o-ring is still in the fixture plug hole, then remove it - the Alla bulb has a new red o-ring already in place. Insert and twist lock the new Alla bulb, then loosen the lamp base with tiny provided Allen wrench. You can now rotate the flat tab that contains the two LED chips. Look inside the light fixture - if you orient the tab so one LED is on top, the other on bottom, then you cannot fit the light fixture back into the car. So instead orient the tab so the two LED chips point to the left and right. This is important: also choose the orientation where the plug and wires will face up towards the underside of the front hood - if they face horizontal, the fixture will not fit. Now lock the LED tab in place by tightening Allen screw. Reinstall plug on lamp base. This is a good time to turn the car on and make sure the new bulb is working. Now the next finicky step: To slide the light fixture back into the car, you must do it this way: A black plastic cylinder sticks out behind the fixture, sort of in the middle. Rest that plastic cylinder on the end of the horizontal guide rail in the car bumper opening. Note the little tab on the back of the flat outside tongue of the fixture - it is supposed to mate with a small hole on the bumper. Now gently slide the light fixture along the guide rail and up into the bumper opening, making sure the little tab eventually mates with the hole in the bumper. (If you do not use the guide rail as instructed above, I guaranty the fixture won’t fit properly.) The two screw tabs underneath the light fixture should now be lined up with the matching screw tabs in the bumper opening. Make sure the light fixture is in the correct position, then reinstall and tighten the screws. Test light again. Hopefully success is yours!

Fácil de instalar gran luminosidad excelente me encanta muchos mejores que las de halógeno luz potente blanca así la pedí en un futuro compraré las amarillas