YITAMOTOR49" Hay Spear Attachment, 3000lbs Capacity Quick Attach for Bobcat Tractors & Skid Steer Loader with 1pc 49" Red Hay Spear & 2pcs 17" Black Stabilizer Spears Spike Fork Tine

I have been looking for a quick attach set of forks for my loader tractor and saw some like this on a local market page. They looked just like these I had seen on Amazon that I thought must be of poor quality because of price. Since they looked the same and were a lot less expensive, I thought I would give Amazon a try. They did not show up when promised. When they were delivered they looked like they had been shipped from a bombed warehouse in the Ukraine. I had my doubts. They are great. I just put them together in 15 minutes. There were no parts missing. They appear to be very sturdy and fit the brackets on my tractor. (I will say they must be lined up perfectly as there is no lateral play.) I have not used them yet, but I can see nothing that would cause them to fail - they are very heavy duty.

Works great i moved 500 rolls of hay (5x6)&(5x5) rolls with a skidsteer works like a charm. I was skeptical at first because of the price but thats why i bought it because of how cheap it was. I would definitely buy again.

Bent the spear on the first 4x5 round bale I moved. JUNK

Came a little scratched up as seen in the photos of the spike, no big deal. The main spike is heavy and solid, not sure if cast or forged though. The stabilizers look good too. It does work with kioti ck2620 ssqa. I dropped my bucket, and loaded the spear on I'm about 20 seconds, easy peasy. The spike has a huge nut that you thread onto the back plate. I moved 9 4x5 bales very easily. Time will tell if it holds up. Overall I'm very pleased, and yes I'm a real guy in oklahoma 😆

Good product. VERY Inadequate packaging. Every painted surface or item is damaged. But it is farm equipment. Missing securing hardware , as packaging failed and this caused items to shift and create most of the paint damage. Nothing bent. Can’t. It’s heavy duty. The welds are adequate .

The media could not be loaded. Easy to quick connect. Spear is strong. To reach round bale that’s pushed in truck bed I have to pick it up with half the spear and put it closer to edge to put spears in completely. I have gone over some dips in my yard and spear doesn’t break.

I was skeptical of this fitting a Kubota l series tractor. Delivered in one day and fit like a glove…… or a $700 Kubota implement. The box was destroyed but no missing parts, only hardware is 2 bolts, which as mentioned by other reviewers, are total junk anyway. You can snap them with an 8” crescent, so tighten carefully. I am going to weld the spears to the frame anyway; the only purpose of having them bolt on is for ease of shipping. Suggest if you don’t weld, get “grade 8” 14mm bolts and be done with it. I still gave it 5 stars despite this short coming because of the weight and overall quality appearance of this implement. I haven’t field tested it yet but have complete confidence this will be very serviceable.

As the saying goes, you get what you pay for. I can vouch for what other reviewers have pointed out – some tweaks are necessary before the fork is ready for mounting and use. But if you're investing in a hay spear, chances are you're involved enough in farming or homesteading to have the essential tools on hand: WD40, a grinder, a dremel tool, and even a light-duty stick welder. It's a matter of deciding whether this suits your preferences compared to shelling out $700-$900 for a top-notch, US-made hay spear.As others have mentioned, brace yourself for the packaging arriving in shambles, with the spear and/or stabilizers likely missing. Thankfully, the UPS guy dropped one stabilizer by the mailbox, and the spear ended up a few feet from the entrance. One corner of the implement was bent, requiring some heating, hammering, and a touch of spray paint to sort out. One of the stabilizer holes had leftover weld that hindered a proper fit, necessitating some grinding, sanding, and a bit of grease. Transportation caused damage to part of the spear thread, demanding some time-consuming fixing with a dremel tool. The two screws holding the stabilizers are noticeably low quality and prone to snapping. Consequently, I added a couple of welding points and swapped out the screws, although I can't be certain I got the exact thread right.All things considered, it's still a decent deal if you're handy and don't mind the extra effort. Plus, it's a more budget-friendly option compared to similar Chinese brands.By the way, note that the pictures are completely misleading. No, the spear won't protrude on the other side of a 4 x 5 round bale. The spear is barely 46 inches long once fit in place.