CRAFT RESIN 6L Crystal Clear Deep Pour Epoxy Resin Kit with Pumps - Food Safe & UV Resistant Best for DIY, Art, River Table, Wood, Flower, Mould Casting Resin Epoxy Kit - for Beginners & Pros

Good quality resin for the price, it's a simple, easy to use, 2:1 ratio by volume mix with no noticeable odour. I used it to a depth of 12cm and got a good finish with just a few micro bubbles which were OK in my piece. It was fully set and demountable in 48 hours.

I bought this to fill some cracks in a wooden cake stand i was making for a wedding.I added colouring to my resin, so i can not say how clear the final result would be, however the final results i had with it were great. No air bubbles, easy to mix, add colour and use.The resin once mixed had a good long working time, i found that after 1 hour the mixture was thinking up, but i was well done with my resin pour by then.I found that using plasticine to made dams whilst pouring the resin worked well and did not harm the hardening process of the resin.After 9-12 hours the resin was very soft and could take a finger print when pressed. After 24 it was fulled cured.Once fully cured it was easy to work with, cutting tools were fine with it, it was easy to sand and came up very nice when using hight grit sanding pads. You can get. Loverly shine with it.I am defo going to use this product again for more word working project and i have several things in mind for crafts and miniature model too.

Great clarity, low bubbling, mid viscosity, but slow curing and still pliable for stirring patterns at 24 hours. Nonetheless, good value.

It’s far better than some cheaper resin great for a range of crafts

I am a complete newbie and I love how easy this resin is to work with!Warm first, mix slowly making sure there are no lines left in the mix. Leave to sit for 5 mins and pour

i brought this kit to pour into a shelf which has a raised lip. The wood needed to be protected as the shelf will have plants on and water spill would ruin the wood. The resin is easy to mix- no vapour at all. Done inside the house with zero fume issues. You must mix thoroughly till it’s totally clear. I put on a radiator to get very warm, aids mixing and also the release of air bubbles. It does take 2 days to cure, 3 days to be hard. This is with a thin coating. Needs to be left up to a week before use. So works well and would use again.

I have tried using this on 3 occasions and each time, I have so many bubbles that its almost impossible to get rid of them. Deep pour resin should be close to the viscosity of water but this is far too thick. I have tried leaving the resin containers in warm water but its still has thousands of bubbles.It does however cure very solid and is fine if you want to do black rivers or rivers with rich colors, but if you want to do transparent rivers, a strange mist occurs after about 18 hrs of curing which you cannot get rid of. Its a shame as I have excellent results with the table top resin from the same company.

I have used several resin brands in the past and first tried this brand from Amazon a few months ago. The resin is relatively easy to use, the only problem is common to all resin, in that it needs care in handling and accurate measuring of the resin and hardener, so is not simple to use. Compared with other brands I have found this produces a remarkably clear material , setting within 24 hours. The basic 500ml pack contains protective gloves and a branded stirrer, which is very useful. I don’t buy larger sized packs as I found in the past that opened packs deteriorate and I now only buy what I can use within a month of opening. I will continue with this Amazon brand. It is good.