AOBEN 1-1/4 Inch SDS-Plus Rotary Hammer Drill with Vibration Control and Safety Clutch,10 Amp Heavy Duty Demolition Hammer for Concrete-Including 3 Drill Bits, Flat Chisels, Point Chisels

It covers what's expected - great drill, great hammer drill, and more importantly jackhammer! The hammer drill with the weight and handle behind your hold has amazing drilling capabilities. Was able to go into concrete and solid stone with no problem whatsoever - honestly, I was blown away. I've had some smaller versions of a hammer drill that really haven't produced - this one is like having the power of Thor in your hands. It's not too big and overwhelming but has enough power and weight to get most jobs done with no problem.The extras that come with this kit are 3 drill heads, 2 jackhammer plungers, and extra head, and an amazing case that has plenty of storage. Also comes with an additional 2 brush heads for the motor and lubrication oil and the head exchange wrench.Pros:- This thing is perfectly weighted in your hand whether pointing to the ground or hold straight out. Nice balance, they worked hard to make it feel great.- The power and control of the trigger are great- All of the different modes work amazing- The case is really well built- The machine feels well-built but not to heavyCons:- It could've come with eye protection but maybe I'm over thinking this - if you're buying this, you're more than likely a pro or already have protective wear.For sure wear eye protection, I've actually found that wearing my shooting headphones is necessary when jacking up concrete - nothing unexpected there.For the money you can't go wrong - I was second guessing as soon as I hit the buy button for the cost of this hammer drill - glad I have it in my arsenal of tools now for sure. If you're looking - add to cart and hit checkout.Thanks AOBEN for a nice machine.

This is another great tool, but not near as costly as my Makita. This is as effective as any demo hammer from Bosch or Makita, at 1/5th the cost. It’s solid, built to last and vey effective for removing cut concrete ribbons and punching through concrete floors. It’s not too loud or bulky, and it’s got fairly good ergonomics. It stores well and stays clean with a wipe down after use. It’s a great tool and worth the extra cost as compared to lesser tools. AFTER 25 HOURS: This is a very good demo hammer, that makes my $900 Makita look very bad. I have broken up a patio slab, a slump stone wall and a garage floor without much effort, using the tools it comes with. It was shipped with additional brushes, but the unit has almost no wear in almost 40 hours of use. I am very satisfied with the unit, and spend evenings looking for new things to demolish, just to see what it can do. It has power to spare, and unlike many Chinese products, I am impressed by this demo drill, it will be used a lot, and I will not consider it a throw away any time soon.

Excellent performance for the extremely limited time used. Nice weight, nice power. Didn't generate a ton of heat. overall very easy to use and user friendly. Just make sure the bit is firmly in the chuck and itll be good. Would've kept had the used 1 I got not have had a broken latch on the carrying case and if Amazon had been more accurate with the delivery time, but this review is for the product only(performance only not longevity.) Used to break up concrete in confined space where jack hammer/demolition hammer wouldn't have been practical. With the vibration control and adjustable handle it's actually comfortable to operate,just let the tool do its job/don't muscle it!

Just what I needed works great

I needed to remove the old Chattahoochee at my entrance to install new pavers and didn't want to place new pavers on something that had cracks and pitch's, so I started to remove the ch by a concrete chisel and sledgehammer, boy was that very daunting task. I went to one of the majors Big Box hardware stores to rent a hammer jack and their website advertised for the cart and chisel together.Thought when I arrived, they were separate charges, however they were already packaged together... being annoyed on being deceived, only rented just the jackhammer for 4 hours as I really wanted to finish the small area I started. Well ran out of time so I returned the rental. I was exhausted for 2 days afterwards. really didn't want to start again with the hand and chisel method, so searched online and found this on amazon.BOY what a "game changer" in so many ways... it was much lighter than the rental, and also came with the tools to chisel out the epoxy rocks, all packaged neatly in a case to store when not in use. The best part was the AOBEN 1-1/4 Inch SDS-Plus Rotary Hammer Drill costs less than a 4-hour rental. Smaller, lighter and much more efficient in completing my task, and I now own an awesome Rotary Hammer Drill so many other projects I plan to do in the future. The reviews posted on Amazon were go so thought they all couldn't be wrong, and they weren't. Rule of thumb....when you finish using a tool really clean it down so it will last much longer.Couldn't be happier with my choice and believe you won't either if you give it a try, nothing to lose and a lot to gain.Hope you found this helpful, in your decision making. Happy Hammering (lol)

Grab this to not use my Milwaukee m12 hammer drill for masonry, since it's small and does the job I don't want to overload it. Tried this to take apart a small concrete latch that was left and solidified near a sidewalk. Not even 5mins and it was a pile of small rocks.Note, other reviewers said to add more grease, yes add mor grease top it off and after some use add some more. And grease the sds section of the bits.Some complain about that the hammer and hammer drill are labeled at the switch and not at the casing. Yes this is true but if you look very close at the casing it has an arrow that when you move the knob it point what your using.So this is a good Sds drill to start to and very inexpensive if it breaks