DIYHD 5FT Stainless Steel Ceiling Mount Flat Roller Sliding Barn Door Hardware

Great product. Well made.

Very well made and sturdy but large and bulky. Not suitable for a hallway because of its size. I had to send back because of this.

This product was the only sliding barn door that I could find that would fit my configuration, so I wasn't sure what to expect. I was pleasantly surprised to find how well-constructed and durable it was. It took some creativity to install but it came out nicely and everybody loves it.

The measurements given to drill holes on the door for the rollers are not accurate. Double check!!!

I was lucky enough to hit some studs I wouldn’t trust the drywall anchors I was going to add studs in the attic. Don’t underestimate the project it took me an entire day and I’m a contractor. Lots of measuring to get it just right. Great option for a low ceiling Barn door. All hardware is machined stainless steel and fantastic.

This hardware has caused us the biggest headache. My company lost a lot of money fixing various issues that this hardware has caused with a barn door project we installed. I did contact the company about the issue and while they were trying to be somewhat helpful they did try to blame the issue on my clients ceiling being unlevel. This was definitely not the problem as I see another customer had the same issue we are having. The hardware is a terrible design and causes the door to swing out on the bottom. The company made a suggestion that we try to clamp it in place with some extra rollers on the bottom. While they supplied the rollers for free they did ask us to pay for the shipping. This did not solve the issue at all and we ended up wasting more time and money. I am only writing this review to help other people not make the same mistake we made by installing a door with this hardware. The holes that you have to drill for the rollers are HUGE and you will not be able to salvage the top of the door if you decide to try it out anyway.

Was easy to install but DO NOT underestimate the project and take your time.1. Best advice I read was to use a mm tape measured. LIFE SAVER!2. 2nd best advice was to trust the measurements. What was written is what I used and everything was spot on.3. I did not have a header nor were we able to hit the joist/2x’s but we used the best butterfly anchors from Home Depot and it’s extremely sturdy.I fabricated my own door that weighs about 70lbs tops. We did have to recess the roller mounts into our door a tad with a dremel because it was about 1/4 inch thicker than allowable.All in all…..worked out great and I will be ordering again for our laundry room barn door!

Hardware is high quality, but arrived with pictures on an installment manual (piece of paper). Pictures were insufficient to provide full understanding of how to install the Hardware. I installed the ceiling brackets at one inch from the wall with wall anchors provided as shown in the pictures. Turns out one inch is way too close to the wall and I could not hang the door without hitting the wall behind the door. I had to patch the wall anchor holes and move them farther away from the wall. Another issue is that the rollers are made to accept a certain size width of a door, but there is no warning or instructions to tell how wide the door must be. I ended up having to add spacers to the rollers in order to attach the door. In summary, this is a quality piece of hardware with poor instructions for understanding the measurements required to install the door properly. The whole project invovled going to a hardware store three times to get additional hardware to complete the installation. I do not recommend this hardware unless a complete set of written instructions are included with the purchase. In addition, the posting for sale of the hardware should include information about the minimum width of the door.