YAMAHA 660 XTR - 04/10 POWER-COMMANDER DYNOJET 1020-1623-V

Description

Injection control for each individual cylinder in a smaller case Adjustment of the "Preheating" petrol (unit increases the engine temperature and allows the petrol / ignition setting according to the indication) Small size compared to USB PCIII Easy to install Computer-powered USB, no need for a 9-volt adaptor Two possible integrated mapping choices Ability to add a unipolar, unidirectional switch (SPST) and switch between two different injection maps The speed sensor/committed ratio allows you to adjust the curve according to the ratio The analogue port allows the user to install a 0-5 volt sensor Design of an adjustment table based on the analogue port such as boost or temperature The Power Commander V is able to allow each cylinder to be individually set for each report when the port for the committed report connection is connected. More tuning ranges than PCIII USB The switch can be installed to alternate between two different mappings that have been pre-loaded on the Power Commander V; available separately Improved 'accelerator pump' For all terrain and quad, refer to the appropriate catalogue in the Power Commanders Moose section. Made in the U.S.A. SECONDARY INJECTION MODULE (SFM) Allows the eight injectors to be adjusted Plugs into the top injector ramp using the original connectors Single cable connection to the PCV Adjusts upper and lower injectors from +250 to -100% If the committed report connection is connected to your PCV, you can adjust all injectors on a "per reminder" basis.