Creality3D Printer Tool Kit Pro 74PCS, Model Post-Processing Tool, Nozzle Cleaning Set, Finishing, Deburring, Removing Tools including Cleaning Needles, Tweezers, Knifies, Suitable for All 3D Printer

I picked these up for another brand of 3D printer, and these worked exactly as described, since installing them my print quality has been a bit more consistent, with fewer failed prints due to adhesion

Used to unblock nozzle but was not able to unblock the chamber above. Plan B needed but this the type of PLA rather than tool being the issue. Items was really useful for pushing out a piece of retracted PLA that had snapped in the tubbing so was not being pushed or pulled out anymore.

I make gift cards as a hobby and go through more glue sticks than you would believe. This little kit of two has been super helpful for crafting on the go. The glue sticks well and I've had no issues with peeling or things coming loose. Overall, effective little glue sticks that do their job well.

Anyone who owns a 3D printer without a self levelling system knows what a pain it is to keep checking your print bed is level. This inexpensive upgrade takes away a little of that headache.The four silicone washers replace the existing springs fitted to the machine. It's a pretty quick and easy job to fit them. You just need to undo the adjustment wheels in all four corners, lift the print bed, remove the springs, fit the silicone washers and then refit the adjustment wheels . Took me less than 5 mins to fit mine to my Ender 3 V2. Of course, you'll then need to go through the levelling procedure again.The good thing about these silicone washers is that they're less prone to shifting due to temperature, so they tend to hold their position better than the springs. The Creality machines should perhaps come with them as standard.If you have a Creality Ender printer, then these are an inexpensive and worthwhile upgrade.

Wow, at last a tool kit designed by a leading 3D printer company for 3D printer users. The previous two "3D printer tool kits" I had previously purchased both failed at the first hurdle. Lack of suitable quality tools.Creality is one of the leading 3D printer manufacturers and also showing innovation in other tech areas. They have put together a comprehensive set of tools in a practical tool case. I could list the tools included but it's a bit pointless because I can confirm the lists supplied on the Amazon site and on the box are correct. The tools are of good quality and it's nice that Creality are not afraid to use their name on the tools/case.The added bonus is that this kit is not only suitable for Creality 3D printers, it can be used on any 3D printer, laser/engraver, cnc routers and for many other electronic projects.Although the case is packed with tools, there is ample room for extras. I have included an ink marker and glue stick. There is also an unused space measuring approximately 110mm x 40mm x 40mm. I've included a weekly pill box with the Sunday compartment removed. This is magic for storing those small parts i.e., screws, nuts, washers etc. This has brought the weight up to a manageable 1.3Kgs.My only suggestion for a small improvement would be the fitting of Velcro tabs on the case side flaps.A wonderful kit, well worth the money and I'd give it 6 stars if I could.

Glue sticks. They are glue sticks. They work as glue sticks.Work great with my Bambu Lab A1, prevents some of the warping you get at the sides of larger prints. Annoying to clean the build plate after, but does prevent some of those annoying issues with bigger prints so would say it is worth using.But also, any old glue stick would do the job, not sure what you are paying extra for.

I fitted some of these to one of my Ender 3 printers a few months ago so when I saw these I figured that as I need to install a new magnetic bed on my other printer and I'd be levelling it again anyway I may as well kill two birds with one stone and replace the old bed mount springs at the same time.The entire process (not including putting the stick down magnetic bed in place) took about forty minutes, admittedly I do seem to have a knack for levelling these beds and some people struggle with it but the job itself isn't a big one.Based on past experience it's a worthwhile effort, I've only had to level the other printer once since I installed the silicon mounts so hopefully these will be just as good.Bear in mind that they are only as good as your own maintenance, so you still need to periodically check everything is tight where it's supposed to be but if everything else is in order they should perform well.

This is a very comprehensive toolkit that has some especially useful tools in that aren't often considered by a starting 3D printer.Items such as the long needle to push filament through, the deburring tool, the tube cutter and the files are often overlooked but very important items. In terms of the tools you get, I don't think there's much missing that you wouldn't already get with a printer. As such, it's a great kit as a gift for someone new to 3D printing and everything in there is useful.However, I do feel like you could get everything in the kit separately for less money, so you're paying for the convenience and the admittedly nice case.Value not so great but does eliminate a lot of hassle and thinking.Tool quality is average. Items like the side cutters, deburring tool and screwdriver can be sourced in better quality, but for a starter set are definitely sufficient.

Werkzeug sofort griffbereit wenn man was braucht. Gute Qualität, Anwendung der Werkzeuge selbsterklärend

conforme au description super

Sehr einfache Bedienung. Stabiles, vollautomat, empfehlenswert. Ich bin sehr zu frieden.

Habe sie mir für meinen Ender3 Max Neo gekauft und sind viel besser als die Federn. Kann ich empfehlen

Habe mir das Tool Kit von Creality für meinen 3D Drucker geholt, damit ich alle notwendigen Werkzeuge und Hilfsmittel in einem Set beieinander habe.Die Qualität der einzelnen Werkzeuge ist durchwegs in Ordnung und für den täglichen Gebrauch beim 3D Drucken eine wirkliche Bereicherung!Es ist alles erdenkliche dabei was man benötigen (könnte). Angefangen von Düsennadeln bis hin zu diversen Feilen und einem sehr gut bestücktem Feinmechaniker Werkzeugsatz!Auch ein kleines Cuttermesser mit auswechselbaren Klingen ist mit an Bord.Eine Stückliste ist außen auf den Karton aufgedruckt. Praktisch finde ich auch die Magnettafel die sich unter dem Feinmechaniker Set befindet. So kann man in den einzelnen Feldern magnetische Schrauben etc. sicher aufbewahren ohne das man Angst haben muss etwas zu verlieren.Das gesamte Set ist in einem Nylon Bag verstaut den man wie eine Werkzeugtasche auffalten kann und dann sogleich Zugriff auf alle möglichen Werkzeuge hat.Insgesamt ist dieser Bag auch recht kompakt gehalten, so dass er auf dem Tisch nicht so viel Platz wegnimmt.Benutze das Werkzeug jetzt schon einige Tage lang und wurde nicht enttäuscht! Für jemanden der eine Grundausstattung für den 3D Druck benötigt, sehr zu empfehlen.