Ideal Standard9 Inch Lever Syphon Kit

Perfect replacement for 9” syphon. I had previously tried a universal fit syphon, but this was useless as the telescopic adjustment would not lock properly. This one comes with the correct seals and I was able to swap out with no leaks in under 30 mins. Works perfectly. Fantastic, thank you.

replaced ex one that had failed fitted ok and worked as expected.Good instructions and provided with rubber seating ring inside cistern and lower fixing ring.Fitted to a close coupled unit and also replace doughnut gasket and galv fixing bracket. So check what you require.

It was easy to fit but it doesn't give a full flush . Not sure if I've done something wrong or it's designed like it .

these aren't designed to last the plastic diaphragm is too thin and will crack and break af about 8 years, the collar on the bottom could be made larger making it easier to fit ( wouldn't have to make it so important to fit it centrally in the hole in the bottom of the cistern ), the actual carcass is well made and will last much longer than the diaphragmThese are problems with most syphons

This is the 2nd syphon I replaced in my mother in law's cistern within a few months because the 1st one, a Mcdee 9in syphon does not work properly in her old Ideal Standard cistern. I wouldn't have believed using the same make even if it is not for the same model can make so much difference! I was extremely happy until I put the lid back and found the C link is so high, the arm of the flush kept hitting the lid!!! Why on earth would they put a C link so big, the lift brings the arm higher than the 9in height of the syphon??? That makes no sense. The least they could do is to provide a 2nd smaller C link as an option but no, you literally get the bare minimum in the pack. I had to switch the smaller c link from the Mcdee to fit onto this syphon in order to make it work. Hence the 3 stars. Otherwise, the syphon itself works fine. Shame about the C link. I would advise anyone buying this product to keep the old C link just in case you need to swap it like I had to.

My toilet wouldnt flush and after checking dr google, i thought the issue was that my syphon needed replacing. I followed a youtube video and replaced my syphon with this, no problem. Saved myself a fortune inPlumbers fees. thank you!

The toilet wouldn't flush and, with a bit of t'internet research, I figured that the membrane on the "one of these" had finally worn through. As the world's worst - and most reluctant - DIY-er, I figured that if I could get hold of a replacement part, I'd have a crack at it. (On the basis that a plumber would cost a fortune anyway, and they may as well be called out for a destroyed cistern.)Fast forward half an hour. Yes - only half an hour. And the job was complete. Not only that, but it flushed properly too.It came with all the necessary bits to fit various different sizes of various other things and, as you can probably tell, fitting was simplicity itself.Really good value for money.

Went in easy and works well