DOME GLASS Tempered Glass Screen Protector for OnePlus 7 Pro and 7 Pro 5G, Full 3D Curved Edge Exclusive Solution, Easy Install Kit by Whitestone for OnePlus 7 Proand 7 Pro 5G - 1 Pack

This is the best screen protector for OP7 Pro right now, in my opinion.Currently, UV screen protectors are the way to go, and there are alternative ones, but I tried one of those, and the installation was very hard. Moreover, those screen protectors are garbage because mine has black spots embedded inside the screen protector, and it's not removable. I felt frustrated when noticing those black spots after the exhausting installation.This product contains only one protector, but all you need is one premium product rather than two pieces of garbage, right? This time mine is totally transparent. Note that you do have two tubes of adhesive, and if you messed up your first installation, you can always remove the adhesive on the back of the glass protector with a knife or your finger and have another try. So, you do have two chances for this product. However, the real advantage is how easy the installation can be. Make sure you watch some YouTube tutorials before the installation, and if you are careful enough, there is a good chance that one trial is enough.This product is slightly more expensive but in my opinion, it's worth it.

**Edit** - 11 July 2020We'll, after a long time applied, I carelessly dropped my phone and cracked the screen. It took a 7 foot drop into steel to crack it. While still 100% useable, I replaced it. Still the same process as before. This thing saved my phone so many times and after a few months, I didn't even realize it was their anymore because it blends to well and provides an absolutely perfect clarity in regards to screen image. I will continue to buy these for this and any substituent phones in the future. 100% will and always will recommend to friends, family and complete strangers 👌Original-This is by far the most Superior screen protector you can get for any phone! I've tried two different screen protectors prior to getting this one and they failed miserably. (Adhesive only on the sides, bad thought matrix and poor touch screen responsiveness).With the liquid adhesive that goes on under the tempered glass and cured via in ultraviolet light, this provides the most protection for your phone.I've been using it for many days now and can say it does not hinder the touchscreen whatsoever or the fingerprint reader!Installing this thing though is a different story. I highly advise anyone wanting a screen protector, not just for the device I have, but for any device to get this product. Make sure you watch the install videos a few times until you really grasp what you need to do. I screwed up the first time, not following one step and it ruined the whole install. Luckily it comes with enough stuff to apply twice.I will say this is great, doesn't even look like there's a screen protector on the phone. It's silky smooth to the touch, doesn't hold fingerprint marks on the screen and does not interfere with the fingerprint reader whatsoever. You need this in your life!

Despite so many questionable reviews, I decided to give this screen protector a shot and it's paid off so far! Here are my thoughts on it after 24 hours:Installation: Frankly, not bad at all. I watched a couple videos two or three times and it seemed straightforward. Where I think a lot of people may be going wrong is they don't realize OnePlus ships the phone preinstalled with a film screen protector (bought direct from OnePlus, I can't speak for T-Mobile variant). The Whitestone protector relies on a glass smooth surface to properly disperse the adhesive, and the OnePlus film protector can be scratched with relative ease and is relatively soft to the touch, so removing this before install is crucial.Once I removed the old protector and prepped the phone (cleaned, used stickers for lint, etc.) The adhesive poured well on the phone and the tray made the installation very quick and easy. The tray itself will align the protector PERFECTLY and there are foam pads on each side that soak up the extra adhesive that may leak. Two stickers are included specifically to cover the top speaker as well from adhesive getting in.Once I pulled the tab to release the screen onto the adhesive, it dispersed well, however, I did have to work out one bubble on the middle of the left side. Try not to work it too much to avoid losing too much adhesive, but a little doesn't hurt. You also have to work the bubbles out BEFORE curing with the UV lamp, otherwise there is no chance you can get them out, since that solidifies the adhesive. If you can't get the bubbles out, a second tube of adhesive is included to try again, just make sure you follow the instructions to fully clean your phone and the screen protector before trying again. (I can't speak to this, as my install succeeded on the first try)Function: This screen protector is Crystal clear! I previously purchased a dot matrix, no bubble screen protector that I hated so much I removed it and kept it as a last resort if this install didn't go well. That one made the screen look washed out and it was obvious there was a screen protector there.This one, however, actually looks just like the unprotected screen, and I hardly notice it's there. The curved edges are completely covered, and it is designed and placed perfectly (again, those installation trays make it ridiculously to get aligned perfectly)I will come back in a couple weeks to comment on how this has held up to scratches and general wear and tear.Case Friendly? - Yes! I have the Ringke Fusion X case (highly recommended, very high quality for less than $15) and there is just enough space on all edges to have no contact whatsoever. There is about 2 mm space on the bottom edge and about 1 on all other edges, which sounds like a small amount but is more than enough. (again, alignment trays for the win!)Fingerprint scanner: So far, I have not had many issues with the fingerprint scanner since install. It seems like there is a slight delay in comparison to the OnePlus screen protector, however it still works well. I will comment on this in the future as well because the 7 pro continually stores more data on your fingerprints to optimize itself the more you use it, so this may improve with time.Overall: Very happy with this purchase. It does have a slightly more involved installation than other tempered glass screen protectors, however I always clean and use tape to remove lint prior to any install, so the main difference is pouring your own adhesive rather than the adhesive already on the protector. Just make sure you take your time and remove the OnePlus screen protector, and odds are you'll get it on the first try. It aligns itself perfectly and feels premium. I docked a star because it is still a very expensive screen protector, however I anticipate it will continue to preform well and Whitestone stands behind their screen protector with a lifetime warranty.If you made it this far, thanks for reading and I hope this review helped you come to an informed decision!

clean all surfaces before you start ,have unit on level surface,does not come with uv light

Ich habe lange überlegt ob ich es wagen soll, auf mein Oneplus 7 t pro McLaren edition ein Glas zu kleben. Ich hatte Angst mein Handy mit Kleber zu ruinieren. Nach einen Monat mit Folien, war ich es leid. Das Gefühl beim Tippen und die Fettfingerabdrücke auf den Folien haben mich genervt. Also habe ich es gewagt und das Kit bestellt. Ich habe mir mehrere Videos zur Montage angesehen und es genau so installiert. Sicherheitshalber habe ich Knöpfe und Ladeanschluss mit Tesa abgeklebt. Das war am Ende gar nicht nötig, das Kit funktioniert super. Es ist gut durchdacht und die Streifen an der Seite saugen den Kleber auf, was es bei Kopien nicht gibt. Man muss nur darauf achten, dass der Tropfen wirklich in der Mitte ist. Ich habe nach unendlich Folien endlich ein Glas, für mein Edge Display gefunden. Zum ersten Mal habe ich gesehen, wie super das Display ist. Folien haben diese brillianz verändert. Das Gefühl beim Tippen super, keine Fettfingerabdrücke mehr, da diese kaum angenommen werden bzw in der Hosentasche verschwinden. Den Fingerabdrucksensor hat ohne neues einlernen sofort problemlos funktioniert. Ich nutze das Glas mit dem originalen Oneplus Nylon Bumper Case und es passt super. Generell sollte das Glas nicht allein genutzt werden, da es dicker wie Folie ist und ohne Hülle aufträgt. In Kombination perfekt, genau was ich suchte. Meine Suche und die Folien sind Geschichte.

La migliore pellicola sul mercato, soldi più che ben spesi.L'installazione è un po'difficile,ma con tanta cura, esce perfett.Non posso far altro che consigliarla. L'impronta funziona davvero bene.Ps: compatibile anche con la cover rugged della poetic, ovvero la affinity.

This is really a great product.First of all you get everything that you need in the package.Second the instructions are clear and straightforward. You can also refer to the corresponding video (which I did) posted on youtube.You are guided through the whole process from A to Z!It worked perfectly well and I have now a perfectly protected phone which looks gorgeous.This is a bit expensive (compared to the competition) but an excellent product. Worth every penny of it.Really I can't praise more!

El material es bueno. A lo alto es corto, le falta 1 o 2 mm para dar una cobertura completa al cristal aunque la parte iluminada de la pantalla la cubre. Después de una colocación perfecta, al mes de colocarlo, de un día para otro, ha aparecido una burbujita en un lateral que va creciendo según avanzan los dias. Para esto, no ha merecido la pena todo lo que vale