2Pin 8mm LED Strip Connector Kit Include L Shape 2 Pin Right Angle Corner Connector, T Shape Connector, Solderless Gapless Connector, Strip to Strip Jumper Wires for 2Pin 8mm 3528/2835 LED Strip

Good quality and easy to use solderless connectors. A good selection for every application.

Got these to go with some tape lights bought locally--12v, 8mm wide, seemed like a match. Works great! only slightly tricky bit is getting the edges inserted under the guides in the connectors. Depending on your tapes, YMMV, but this works great for me.

Solid connection. Easy to use. The wire jackets are annoying to strip though. Even with a wire stripper. I don't usually have that much problem. I had trouble making contact with the DC connector with the tiny leads they had. Everything else was great. I liked that the corner connectors have a little flex to them.

A simple instruction page would have been appreciated, but we got by. We used the T and L connectors. For some reason, these install "upside down" which means the little lids that clamp down to the wire are on the underside when they have adhered to a wall. Also, the "bite" these have on the LED tape is very small - about 1/8" - one LED strip pulled out when we were holding this up to tape to the wall. If the "throat" of the tape "channel" was twice the size - say 1/4", it would help to align and it could have a much bigger "bite" on the end of the LED tape to hold it better. All in all - an average product that could have been excellent with just a little more forethought into the design. The contact points that contact to the LED tape are minimal - if they were twice the size that would create a much more reliable connection too. For the price, these worked - but I would have gladly paid more for an improved design.

My husband put under and over cabinet lighting in our kitchen! It did require a few extra steps but only because my husband is not a man that will leave something not done to the best of his abilities (perfect as possible). He put in on/off buttons under one cabinet so we can use them as we wish. Anything is better than the blinding recessed lighting in our kitchen!! Definitely a 5 star review!!!!

Used for putting LEDs in closet. I have never had such a painful experience putting on lights. The connectors don’t even pass a current half the time and to be honest would never do this again

These connectors work great, but take your time when connecting LED light strips. The exposed contact points on 2-conductor LED strips can vary in size and width, so when you slide the LED strips into the connectors, make sure their exposed contact points are properly aligned with the connector contacts.The 90s, Ts & extensions/bridges allow for lots of configurations.Remember to only cut LED light strips at the designated points, otherwise you might be cutting out a required current limiting resister.

Perfect size for my project. Have held up great.