How long will it last in the gallon jug if it's not all used within a few months?

Hello Darracott,We have seen Pure Tung Oil last 5+ years if stored in the right conditions.Make sure your Pure Tung Oil is stored in a dark, temperature-controlled, room.Pure Tung Oil oxidizes so you want your storage container to have as little air in it as possible.If your Pure Tung Oil forms a film on the surface, you can peel the film away and use the oil underneath.If your Pure Tung Oil freezes, the natural fat of the oil may separate. Shaking will not help in this situation. Instead, salvage what tung oil you can, being careful not to mix any of the natural fat back into the oil.If you have any other questions, please visit our website RealMilkPaint.com or call (800) 339-9748 Monday-Friday 8a-5p CT.

What should i clean a 18th century new england pine floor with before applying the tung oil?

I always favor the most gentle approach possible - when dealing with antiques. My personal preference is nothing more abrasive than # 0000 steel wool - and - acetone. Takes a lot longer than some other methods - but - worth it. Then I apply the tung oil with # 0000 steel wool - let it sit for about 30 minutes - then wipe off the excess. Then - dependent upon how much soaked in - and - how much leaked out - wipe off any excess that might still be leaking out. After a few days - or - maybe even a week (Tung Oil is an oil which "cures" by oxidation - not - evaporation) apply a second coat. My preferred finish coat (for furniture - I've never tried for a floor) is Carnauba Wax - buffed to a shine with a shoe brush. Good luck.

What is the approximate square footage of coverage per gallon?

http://www.realmilkpaint.com/products/oils/tung-oil-wood-finishes/If you look in this section you will find they rate coverages:COVERAGE:8 oz. covers 25 sq. feet16 oz. covers 50 sq. feet32 oz. covers 100 sq. feetGallon covers 400 sq. feet one coatI have found that when working with tung oil there is a wide variability on coverage depending on the porosity of the wood. How many coats you need to provide to reach the finish you are looking for varies as well. I used the dark tung oil to refinish an antique birch piece and needed to apply 7 coats to get the desired finish. That being said the results were highly satisfactory.

After I cut the tung oil, can I apply with a reg kitchen spray bottle then of course wipe it afterwards

I have never tried a spray bottle as you want to try and control your coats. I imagine you could but if you use a solvent type to cut it down, it will eat the plunger eventually and I would think its to thick to spray. I could be mistaken though. I try to leave the oil on for 30 min and no more. If it absorbs too much, you will never get it to dry. Every project I have done has taken at least 15 days to semi-dry and then another 15 to fully. (area and temp will change drying times) If you are using PTO on food type surfaces, use what the Real Milk Paint website for a recommended mix. (non-toxic) If its for a project, cut it 50/50 with mineral spirits (not turpentine) on the first coat and straight PTO on the rest. You must (if possible) HAND RUB it into the wood. The heat from the friction is what helps the wood absorb it. Some woods will absorb it easily without rubbing but hard dense woods like beech, are very difficult. It takes a lot of practice to get it right but the end result is beautiful.

Desertcart Logo

Deliver to Slovakia

For best experience Get the App

DOWNLOAD THE APP

WE SOURCE ITEMS FROM

UAE
UK
India
USA
Japan
KOREA

Customer Services

About Us

Customer Support

Description

🌿 Pure Protection, Naturally Perfect Finish

ECO FRIENDLY ORIGIN - Cold-pressed from Tung trees grown in pristine Chinese mountains
PURE ADDITIVE FREE - 100% pure tung oil, no petroleum distillates or thinners
DEEP WOOD PENETRATION - Enhances natural grain without gloss or heavy buildup
VERSATILE SURFACE USE - Ideal for wood, concrete, brick & more, indoors or out
ODOUR BLOCKING MATTE FINISH - Keeps your space fresh with a subtle, natural look

Real Milk Paint Pure Tung Oil is a premium, additive-free finish that deeply penetrates wood and porous surfaces to provide a flexible, waterproof, and matte finish. Sourced from cold-pressed Tung tree seeds in pollution-free regions of China, it’s FDA-approved for food contact and ideal for both interior and exterior applications, covering up to 400 sq ft per gallon.

€ 386.59

Duties & taxes incl.

Slovakiastore

Free Shipping

with PRO Membership

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Abdullah B.

Great price for an authentic product. Fast international shipping too!

3 weeks ago

Anjali K.

The product quality is outstanding. Exactly what I needed for my work.

1 month ago

View all Trustpilot reviews

Manufacturer	Real Milk Paint
Part Number	PTO-G
Product Dimensions	20.32 x 20.32 x 20.32 cm; 3.56 kg
Item model number	PTO-G
Size	3.78 l (Pack of 1)
Colour	Clear/Colorless
Finish	Matte
Item Package Quantity	1
Coverage	250-400 sq ft/gallon (interior), 200-300 sq ft/gallon (exterior)
Special Features	Odour Blocking
Usage	Exterior
Batteries included?	No
Batteries Required?	No
Item Weight	3.56 kg

Real Milk PaintPure Tung Oil - Gallon

Details

Description

Specifications

Have a Question? See What Others Asked

Common Questions