JDHDL[3 Pack Soft Hydrogel Film Screen Protector for iPhone 15 Pro Max/iPhone 15 Plus, Upgraded Non-breakable Flexible TPU for iPhone 15 Pro Max Screen Protector Film (NOT Glass)

So this is the first time I'm trying these. I picked these because I love getting my hands on the latest techs right, but I hate how bulky protectors can almost ruin the experience. The Iphone 15 Pro Max is actually aesthetically very pleasing and a bulky cover or screen protector can rob that from you where I feel it's almost not worth getting it if you had the 13/14 Pro Max.This thing is thin, ohh wow, so thin, it's impossible to perceive on your phone. It just blends so tightly with the screen.So the pros on this for me:- super thin and clear- adds no additional perceiveable weight and definitely no bulk in anyway to your phone-Cannot see the edge without really really tryingBetween Pros and Cons- The feel is not as slippery, it's not bad but it's not what you're exactly used to and again not too far off, but I'm not too sure yet. I think this is something you can get used to though.- I do see fingerprints on there, nothing too different from tempered glass really, it wipes off easily though.- A couple of scratch tests and it seems fine- Not sure little dings will heal themselves (too early to tell)- It's hydrogel right, so I sense that it may show imperfections if you put it through its pacesCons- I personally had to be patient to remove the bubbles and to put this on. I had to apply it slowly, meaning dust could probably get under the get before it's fully applied - I didn't like that part. It took a bit to muscle out the bubbles.- It's a big tough to remove and since it's so think, be patient because you can actually scratch your screen. I know it's hard to remove because I messed up putting it on where I had to use another one (you get 3 in the box, so that's good).- Putting these on should be seamlessI would have loved it more if the application was less painful and it fit perfectly on the phone. The fit is definitely good enough, but it's marginally off center due to how you're putting it. You may get it perfectly, that's a tough one. It sinks and blends in so well onto the phone that even if it's off you can't even tell, so that's how good thin and clean it glues onto your screen.It's a great idea in my mind, amazing, it needs to be perfected though... here's a product someone could adjust and resell on Amazon for all types of phones, maybe I'll look into that...Ok I take a lot of things back... after trying a privacy tempered glass, just for the heck of it (the privacy glass does compromise the screen a bit, you have to touch more precisely and a bit more firmly... didn't like it). I bought another set of 3 and this time I followed the directions and can you believe, NOT ONE SINGLE BUBBLE, NOT ONE... Folks follow the directions. I think I should make a video for this and show people... if the video directions spoke it would have been easier to follow.Quick Written direction1 - Keep everything in the packages2 - place phone on its back on the mat in container3 - Insert plastic holder in USB port with the 3 prongs facing up at the phone screenMake sure you push the plastic holder all the way till flush (Push in tightly, it's tight, but it's fine)4 - Clean phone screen as clear as possible (I turn the phone off when I do this, makes it easy to see smudges)5 - remove the hydrogel from small plastic bagNote that there are two sides - Make sure you can read "Paste Start Line"6 - At the bottom where it says two - Insert in the prongs facing up7 - Align as neatly as you can (that's not too bad at all)8 - Once you're happy with alignment - Press everything down where it says Paste Start LineYou have not remove the film yet (trust me)9 - On the top where it says 1. Lift it all the way to the green part. It will show the top separation11- Separate, as to just break the seal, so you can adhere the gel on the phone10 - Now with the presser, just press while moving up on the phone screen till the top falls out.12 - Now go to Number at the bottom, Lift it to remove that bottom film and again with the presser, push it all the way down, till the bottom piece falls out.13 - Now Press firmly and peal from number 2.Clean, bubble free.... Even better than glass.The first time, I was remove bubbles with a lot of force for 20 minutes till my fingers hurt. This time, I was so shocked.Just follow the directions in the video. If you scan the code for the directions, you will see the quick video. Read my directions and watch the video and you're good... Now I will keep these for a few months and see how they hold... Clarity is prfect and the minimalistic look and feel is just priceless...--Big Fan ... Please note that I don't know anything about this seller or the product in anyway, I just love it, I was looking for something like this for a while. It may not be for everyone, but for me this is a win as I don't like bulky cases that ruin the experience of the phone... nothing is more gorgeous than your new tech toy, putting it in a bubble sucks...

I bought a new iPhone, and had heard the new screens are harder to prevent cracking, but are more prone to scratching. So I picked up these because I don't like the glass covers (I've seen too many of those crack themselves).The contents of the box were labelled differently than in the video or included instructions, but I figured out which ones were which easily enough. I followed the directions and spent a bit extra on each step to squeegee it a little extra. The process went smoothly. The guide helped line things up. The mat protected the camera lenses.When I was done and removed the top layer, voila, no bubbles and a perfect fit. I was expecting one or two bubbles at least, but it was perfect.Since then, no lifting, no scratches, and the touch screen responds as well as my previous phone which didn't have a screen protector.So worked well, seems well made, and worth what I paid for it. Now I just need to figure out where to put the two extras until I beat this one up enough to replace it.

Great screen, especially for the price!! I discovered way back w my iPhone 5, when they started making the “unbreakable” glass screens that they were HIGHLY breakable, & even if they kept my actual glass from being broken, it was a pain to change so regularly. Non-glass screens are increasingly difficult to find, especially ones that don’t scratch quickly. This not only has been significantly better quality than a 3 pack I got for an 11 pro at the same time for half the price (but what should really be expected for less than $3 each?!? Even those have proved a good & protective purchase!), definitely standing up to scratches better w a noticeable difference in quality & thickness of material w/o taking away from screen quality whatsoever, AND the tools included to ensure it’s aligned well are easy to use & make it manageable for even the most challenged phone owners!I can’t speak to it fitting under enclosed cases because I use a wallet case that has an open front. Nor can I can’t speak to the difference in bubbles, or lack of, because it’s easy for me to apply stickers & such w/o that issue for some reason, so I won’t pretend everyone can do it as easily, BUT I do think having it aligned correctly & a little patience should make this among the easier available. Not to mention, for essentially very little $$, you have multiple chances to get it right. Have had it on for a little over a year & haven’t used the 2nd in the package yet! $15 is very little compared to the cost of replacing a screen, & my cheap 11 pro ones held up to being run over face down on the road w some unavoidable scratches in that situation, so I expect these would do as well or better & who cares if you buy a whole new set at this price if you’re otherwise protected?!?I read enough reviews of all the alternatives out there, so you don’t have to…if you’ve landed here, STOP. BUY. RETURN to your life; you’ll be pleased w this decision, or you’re probably difficult to please anyway